Marketplace

The fog lights are sold! The fog lights are sold !!

have some things lying around the house and they need to go to get out of the way, and raised me some cash for more important issues with my car. all prices shown INCLUDE shipping to the lower 48 states and are in USD. I am IN Canada so the shipping isn't too cheap hence why the prices might look a bit high at first glance. for now all prices are FIRM. shipping could be cheaper with multiple items and i can work that out. will also be a bit cheaper if YOU are in Canada. -stock URETHANE steering wheel from my 02 P5. this is not leather. in perfect shape, no marks etc. no airbag included. $40 shipped - a clear hood protector by "Xtremecity". i believe it came from eBay, i bought it from someone, who bought it from someone else etc...

Traded my Protege 5. Thought I would try to sell this to someone that will actually appreicate it. Aux Mod Basic I have replaced the standard jack with a direct soldered lead to a standard headphone plug. I also added a ground loop isolator that improved the sound for me. The isolator is easily zip tied into the area where a cassette deck would go. Price Drop $40 shipped. I will ship as soon as I have payment.

All, I have a set of blue skirts in very good condition as well as a rear bumper lip. The lip is in pretty good condition, with a light scuff on the pass side corner, and the usual exhaust melt. The scuff doesn't go through the plastic, and is really just superficial. It'll easily blend if the new owner has someone repaint it for them. Right now the lip is on the bumper because I didn't feel like wrestling with it to get it off when I bought it. Both items are local pick-up only due to the size of these pieces, but I am willing to meet up with the buyer within a reasonable distance if I get my asking price. I also have a set of MSP RH 17" gunmetal FS here. If someone doesn't like the price but is interested in the parts...

PRICES INCLUDE SHIPPING TO US. Paypal is cmprice2009@ymail.com 1.) PS Pump $sold 2.) Medieval Lightweight Waterpump Pulley $sold 3.) stock radiator brackets $sold 4.) one stock p5/mp3 fog light $sold 5.) Single column pod $40 6.) Stock black gauge cluster with red bulbs $70 7.) ACT stage 1 street clutch 20k miles, great bite $150 8.) Stock MAF sensor 65k miles $45 9.) Starter 65k miles $50 10.) Stock fuel lines $25 11.) MP3 steering rack (tighter ratio than stock protege) and all lines and reservoir, cooler,etc. $sold

Up for sale is a full set of OEM Tokico Black Struts. These only have about 13k miles, no signs of leaks or anything. Asking $100+Shipping

Please PM me with any questions. Items do not include any Insurance. All items Sold as is. Thanks for looking. Make your own downpipe. Includes both 5bolt flange(w/ studs not in pic), 4bolt flange(w/ studs), and 2.75" Mid-steel elbow. I have the smaller diameter pipe to finish it off at the 5bolt flange.. Asking 100.00 shipped within the lower 48 US 4bolt flange(w/ studs) Make an offer Misc Silicone Couplers, Elbows and small T-bolt clamps. 2-2.5 reducer blue, 2.25-2.75 reducer red, 2.25-3 reducer black, 2.5-2.75 reducing 90* elbow blue, 2.25 red & blue, 2.5 blue, 3: 2.75 black, 2.5 90* elbow black, 6: 1-1.5 T-bolt clamps Make an offer K-sport Coilover tools: Spanner wrenches, Adjusting Knobs, and Brake line brackets Make an...

Hey guys...I'm trying to see if I can get 10 - 15 ppl. interested in getting their headlights retrofitted with projectors,they will look like the "MATT V" ones,with the option of having the "halo" eye, nothing is set in stone yet but pricing should be around $ 450.00 with YOUR headlights,everything else will be provided, when you do get your lights back it will be complete and ready to be installed....Like I said NOTHING is set in stone and I need 10 to 15 ppl, so whose interested???

I have a set of 4 used 2008 Mazda OEM Snowflakes with 205/50 ZR17 Continental Extreme Contact DWS tires on them with TPMS. I am just testing the waters to see if anyone is interested. The tires are almost brand new bought them in september. Rims have slight curb rash but nothing very bad. I am willing to split up the tires and rims if I get a good offer. Set of rims with tires: 700 + shipping Just rims: 450 + shipping Just Tires: 350 + shipping Also available for pickup in San Jose area The tires brand new are over 500 on tire rack and these have almost full tread. Thanks guys!

Hello everyone! I have lots of parts that I didn't install all for you! The prices that I give are including shipping, if some items are larger/heavier you will see somewhat reflected in the price; for small items shipping is free! (well I pay for it :) ) If you'd like an item shipped outside of the contiguous 48 US states please include an additional $10; this is regardless of size, sorry! I am open to negotiations with prices, please PM me with your details! I will ship an item using either USPS or UPS depending on size/weight within two days of PayPal payment made to kevin.lefevre@gmail.com , it takes a little bit to package and ship you item correctly! $220 shipped - GReddy Profec B-specII electronic boost controller with...

Looking to do some PM to your slushbox Protege?* If so, then this thread is for you! All items are BNIP and include all hardware/instuctions where applicable. Shipping is not included and I will ship International, with the exception of the ATF. First up is a Hayden Transaver AT Cooler, part #OC-1677 SOLD Next up is an Autozone AT filter/gasket set, part #TF/172/T872 SOLD And last but not least I have 9qts of Mobil1 Syn Dexron/Mercon ATF. $70 for all or $7ea For anyone interested in purchasing all items at the same time I'll do a price of $125 and give a break on shipping (that doesn't mean free :)). And as always I'm open to meeting up with anyone locally. *All items f/s are compatible with other vehicles but I ask that you...

I don't know what all these parts are called individually but I installed a new CAI and have these parts for sale: FYI, I dropped the filter box and broke a few small pieces off but it should still seal properly. All of them are in good condition and are just a little dirty. All the parts are light so shipping should be pretty good from 76059. Paypal=good (yippy).

Kit includes the following: -Genuine Garrett T3 Turbo, 60 trim with .48 A/R -Polished Stainless Steel intake and intercooler piping. Includes convertible CAI/SRI and blow through MAF relocation -AEM Dryflow air filter -2.5" Stainless Steel downpipe with SS flanges and extra O2 bung for a wideband sensor. -Purpose built bar & plate Front Mount Intercooler -Purpose built water outlet and silicon hose -Stainless Steel oil feed and return lines -GReddy RZ Blow Off Valve -SteedSpeed Turbo manifold with V-Band port for external wastegate. Production manifolds will be ceramic coated in Black. -ARP Turbo hardware -Tial MV-S 38MM Wastegate (available in black, blue, or red) -High quality silicon couplers -SS T-Bolt Clamps -Stainless steel...

So I bought this... Sand Mica 2002 Mazda Protege DX w/ an AUTOMATIC I have taken what I need from it and this is what's left, PM for shipping quotes and paypal info, no dibs.. money talks and thanks for looking! Complete engine harness w/ fuse box and ECU, the ONLY thing that's cut it on my signage and can be easily fixed ~ Main ECU Harness SOLD Complete interior harness w/ fuse box, hardly anything cut ~ $60 Harness from the driver's side firewall to the headlights and such ~ $40 If you only want the main fuse box w/ harness to alternator ~ $30 If you only want the ECU ~ $40 Dash w/ harness, pass side air bag and other random stuff ~ $70 If you want anything from the dash that is in the picture just PM me and we will...

Bumpers in great condition, scratches on bottom, but other than that, its good to go. Asking 300.00 for bumper and reinforcement OBO. Or 200.00 for bumper and 150.00 for reinforcment. Price is negotiable.

Hey guys I made some thermal spacers for my intake manifold project and since I had enough material I just went ahead and made a few extra spacers (2) so if anybody wants them, first one to come up with the $ gets em. I was thinking $40 each + shipping which shouldn't be bad since they weigh less than a pound. They're made of Garolite and are 1/4" thick. [/IMG] and here's a teaser of my intake manifold project for interesting conversation. I could make more of these if I had interest in them and they would most likely come with Jay Racing fuel rails from my last GB, be polished to a mirror and powder coated for protection against the elements. Also has the ability to use an aftermarket mustang style throttle body or the oem protege...

Selling the speed so getting rid of some parts in the garage. Located in upper Bucks county PA. Intercooler. 50$ shipped.

Hey guys, im looking to do another round of endlinks, this time only the rears. I would need at least 15 people to start. Price is $50 Shipped $55 to CANADA I will not be accepting payments until the 1st GB is complete. GB LIST 1. 2. 3. 4. 5. 6. 7. 8. 9 10. 11. 12. 13. 14. 15.

These are a perfect fit for a mazdaspeed3 since they came off mine, I am located in Saint Louis, and I prefer local. Fenders might need to be rolled, and if you are local you can borrow my tool. Pictures to follow: Price is $1200 Firm Also has TPMS and all 4 caps for the wheel as pictured. I will meet someone within a reasonable distance.

I wanted to see if there was anyone in the Southeast/Tri-State region (AL, FL, GA) that might want to swap seats with me. These are OEM leather seats from an '03 P5 with ~78K miles on it. I'd like to swap out the door cards also. They're in really good shape. No tears, rips, stains, or odors. The rear seats are in even better shape. The front seats DO NOT have air bags. The cloth seats and door cards must be in really good to great condition (no rips, stains, pet hair, or odors...i.e. cigarette smoke, pets). I'm willing to do an even swap if you drive to Tallahassee. Consider the difference in price your time and gas money driving to my house. If interested, I ask that you take proper forum pics of your seats and door cards, too, so...