I got my hands on some LED floodlights that install where the stock fogs go. It does require some bending of the stock mounts, but otherwise they fit well and are much brighter than even the stock Hi-beams
Here is the link to the https://www.amazon.com/dp/ (commissions earned)
This is a guide on my method and I am not responsible for any damage
1. remove stock fog lights and housing
2 . Remove the fog light housing mount. You will bend this later to accommodate the LEDs
3. snip off the stock connectors on both the stock and new LEDs
4. securely wire the stock connector to the aftermarket LED
5. test the lights while they are not bolted on the car. You may need to change polarity if they do not turn on
6. bend the stock mount to the diagram below. Make sure they are mirrored, since the bolt is offset. You may need to angle the lower piece upwards a bit to get the correct position for the light. The upper diagram is as viewed from the top before bending and the lower is as viewed from the side after bending and on the car
7. Adjust everything to your liking and you are good to go
Optional: do this modification to allow floodlight use even with high beams on. Keep an eye out for minor parasitic draw, though.
Here is the link to the https://www.amazon.com/dp/ (commissions earned)
This is a guide on my method and I am not responsible for any damage
1. remove stock fog lights and housing
2 . Remove the fog light housing mount. You will bend this later to accommodate the LEDs
3. snip off the stock connectors on both the stock and new LEDs
4. securely wire the stock connector to the aftermarket LED
5. test the lights while they are not bolted on the car. You may need to change polarity if they do not turn on
6. bend the stock mount to the diagram below. Make sure they are mirrored, since the bolt is offset. You may need to angle the lower piece upwards a bit to get the correct position for the light. The upper diagram is as viewed from the top before bending and the lower is as viewed from the side after bending and on the car
7. Adjust everything to your liking and you are good to go
Optional: do this modification to allow floodlight use even with high beams on. Keep an eye out for minor parasitic draw, though.