17x8.5 +30 / BC Coils with Front and Rear Camber Plates / Will they fit?

[batmang]

Anyone have any experience with 17x8-9" wheels with a +30 offset fitting their MSP?

 

[hornsfan10609]

9" will probably poke and require a lot of fender massaging/camber. I am running 17x8 +52 with tokicos and it required a spacer in the rear to clear the strut.

 

[traxxasaddict]

horns, do you have BCs as well? Or stock struts? I am under the impression that the stock struts are larger diameter and therefore rub on wider offset wheels.

 

[hornsfan10609]

I have a new set of BCs in the box in my garage waiting to be installed, but right now I am on Tokico blues and Tein S techs. The coils are much smaller than the stock struts and allow more clearance than stock struts, but it is not a significant change. The wheels still have to fit under the spring perch of the strut.

 

[2k3 PrO RiDa]

There's an old member who used to have a titanium Msp with this setup. He had Enkei rpf1's in the sbc finish.

 

[2k3 PrO RiDa]

You may be able to find more photos through google but here it is. His name is Swirlfx. These are 17x8.5 +30 w/ 215/45/17