2003 protege 5 parts for sale front/side and custom rear...

I have some spare parts just collecting dust in my shed. Everything is factory except the rear bumper which is 1 of a kind rear bumper...i didnt complete it because i ended purchasing one. I would say its between 85-90% done. Needs to be sanding and some more bondo. Its been fiberglassed and is a solid piece. Its a direct fit. Its a factory rear with mazda6 kit molded. I have a front bumper that shows signs of wear and tear. 2 clips are damaged and the front corner is pushed in. can be popped out. I have a lower grill in good shape. faded thats all. i have 2 fog lights. one is in good shape and has mount attached. other has a chip inside the glass and chrome needs to be cleaned if its possible no mount attached. I also have harness for the fog lights. I have side skirts that go on both protege 5 and a set of fiberglass mazda 6 skirts. the mazda6 skirts are about an inch too long but can be molded with a simple cut in the middle, bolt to car and mold the cut (bondo/FG).

prices do not include shipping unless noted

front bumper-110+SH OBO SOLD
protege skirts 120+SH
Mazda 6 Skirts 100+SH
lower Grill 30 shipped
fog light harness 35 obo
complete fog light. 50+SH
damaged light 10+SH

custom rear...throw me an offer. its one of a kind and has some time and money put into it to where its at now. Dont low ball because its just as easy to keep it as a spare.

best way to contact me is seijae85@gmail.com

 

[seijae]

 

[Macabe]

Do the 6 side skirts fit the protege5

 

[seijae]

Do the 6 side skirts fit the protege5

they are pretty close. they will have to be cut as they are about an inch to long but easiest way to do it..is cut them and mount one side at a time and then come back and put the other side up and mount...take them and fiberglass and make a solid piece OR can leave them mounted and just take some bondo or fiberglass the cut. if they are mounted to the car snug, i wouldnt see this being an issue with cracking with bondo. This was what i was going to do until i found some wings west skirts for 100 bucks

 

[rar40941]

Ok how much for the front bumper and both front fenders ??

 

[seijae]

Pm'd

 

[seijae]

Ill take best offers as i am trying to get these these parts out of my shed however please do not low ball me.

 

[seijae]

Need this stuff gone. Taking offers. I know there is something that someone needs

 

[newgen91]

Do u just have one fog or two

 

[seijae]

PM'd

 

[seijae]

bump

 

[INeedMoarLow]

I need a lower grill but you can get one new on online Mazda parts for like 35 with shipping... Which I know they get a huge discount on shipping being a big company... But what's the lowest you can go on it? Mine got a hole from hitting a raccoon -.-"

 

[seijae]

Bump it up

 

[seijae]

Bump

 

[seijae]

Bump

 

[seijae]

i need to get these parts out of my shed...make offers. Front bumper is gone. everything else is still available.

 

[seijae]

Ok i need these items sold.
I had some issues come up that cut into my budget. paint job on my car ended up being 250 more than i was told..needless to say i need the extra the cash.

ill take 35+7 flat rate shipping on the fog/harness
both sets of side skirts for 165 shipped. Shipping is roughly 65 thru greyhound. So I'll pocket 100-110 for the skirts.
front bumper and lower grill are sold
rear bumper is still best offer.

 

[twister323f]

pm send Seijae