return oil line.

[Jay]

does anyone have a pic of the oil return line that comes with the spool kits. this is what i got for my return oil line with my kit from spool and i can't seem to get a hold of terry to ask him a few questions.

 

[svxin]

did you get a bung? ill try to go out and get a pic of mine real quick

 

[svxin]

immage quality is really bad but you can sort of see the line sorry my car is super low so i couldnt get any better pics.

 

[svxin]

my line is one peice its about 10in long i think your line should be fine what was your question about it? sorry my pic probably didnt help downpipe is in the way.

 

[Jay]

i did get a bung however my fitting is to big to screw into the bung. my line is about 10in long and it's two pieces not one. since it's not one pieces and will not bend i don't know how i'm going to connect it from my oil pan to the turbo.

 

[Jay]

by the way thanks for the pic.

 

[Kooldino]

Hmm, that does seem kinda fruity. The one end doesn't seem to have any kind of threaded fitment...

 

[svxin]

i have what looks like a 45 comming off my bunk i installed the weld in one the 45 comes off of that and then into the line to a 90 to the turbo here is a pic of the 45 i know its really crappy looking i droped my camara and i think i broke it woops hey i tried maybe some one else will take a better pic

 

[starflare21]

Mine is just a straight section coming off the pan, going up with a 10" or so braided 1pc. line, then to a 45 degree fitting, then to a flare to pipe fitting, then finally to the turbo oil flange and gasket. that looks like a really weird return line.

 

[svxin]

do you have any pics?does it look like mine?

that looks like a really weird return line.

his or mine? yours sounds a little diffrent compared to mine. hummmm anyone have pics of there oil return lines?

 

[deckedoutmp5]

that is the smallest line return ive seen. wild.

 

[Little Beavis]

Check out this post. Seems like they gave you two of the super short ones in case you didn't want to do the super short way.

I have a 10 or 12 inch one in my garage if you want to trade.

Anyway, check out the thread, you may be okay yet.

http://www.mazdamp3.com/vbb225/showthread.php?s=&threadid=29272

 

[Little Beavis]

Hmm, that does seem kinda fruity. The one end doesn't seem to have any kind of threaded fitment...

:'(

Look again dude. . .

 

[GOTZOOM?]

I need a short one. Mine hangs below my bumper, but I can't loop it because the idiot who welded my pipe kinked it and now if I loop it, it kinks. Are the short ones in stock now Terry?

 

[spoolinmp3]

Thats 2 oil lines right there
You just need one of them....somehow you were accidently sent 2

 

[YP5 Toronto]

sweet...you got a bonus prize in your box.....too bad terry didn't send you 2 turbos...that would have been even sweeter!

 

[spoolinmp3]

 

[GOTZOOM?]

I'll take the other if you don't need it!!!! The oil line that is, I got enough turbo to equal two turbo's as it is.

 

[Kooldino]

Not sure if that'd be long enough if you split it in half. They need to be about 10" from end to end.

 

[Little Beavis]

You can make it even shorter. . .mine is nearly 6"!