Spicy Msp Engine Setup Pics

SergMSP

Member
:
'03 Mazdaspeed SpicyOrange, '05 Mazda 6S V6
Hey All,

Finally got some pics of my setup to post for anyone's opinions, likes, and dislikes. I am looking to add some mods and would like your suggestions and I would like to see if any vendors can sell me parts that will work with my setup. Thanks to all!

Serg
 

Attachments

  • IMG_0174.webp
    IMG_0174.webp
    69.6 KB · Views: 355
  • IMG_0175.webp
    IMG_0175.webp
    64.4 KB · Views: 256
  • IMG_0176.webp
    IMG_0176.webp
    54.1 KB · Views: 253
  • IMG_0177.webp
    IMG_0177.webp
    61.2 KB · Views: 231
  • IMG_0184.webp
    IMG_0184.webp
    61.5 KB · Views: 257
Last edited:
Looks good. How it running ? any stalling issue ? how about the turkey, is it still present ?
 
greddy bov stalling issue gone

rocketr2 said:
Looks good. How it running ? any stalling issue ? how about the turkey, is it still present ?

Yes sir, I used to have Stalling issues when the BOV was first installed. But with help from the tech, we were able to tune the soft/hard setting on the bov and raise the level of the Idling so that it wouldn't turn off. Now, it doesnt turn off on me at all. The turkey, yes, i still get it, but it depends, if im accerlating hard i'll hear the sweet whistle sound from the greddybov venting...
 
Newb question

Hey all, I've seen a lot of MSP's with a hardpipe where I still have the stock rubber one. Can someone help me identify what the name of it is? Where can i buy a better one, steel one? What exactly are the pros/cons of changing this pipe or leaving it the way it is?
Sorry...still newb, Thanks
 

Attachments

  • IMG_0175edited.webp
    IMG_0175edited.webp
    61.6 KB · Views: 260
Last edited:
Hardpipes, SMIC

MSP#735 said:
http://www.**********.com/MSP_Hard_Piping_p/sumspcp.htm enjoy!
Thanks dude, that explained everything. I am also looking into purchasing a SMIC, I was looking into the CustomMSP, or the Corksport Power Series.
If I buy the SMIC, will the steetunit pipe still be ok with it? Or do I have to replace it to match the SMIC?

Not sure if I should just buy the pipe or wait to save up for the SMIC...maybe that pipe comes with the SMIC???.......
 
********** Turbohoses Hardpipe Kit

540James said:
**********.com will be able to supply you with the whole system, 2 pipes and SMIC

Yea but I want to stay with my setup or else I'll lose the Greddy BOV I already have on there, you know? Not only that, it's 795$ kid...mucho son...

Do you know if I just get the coldpipe alone, if i'll have problems ?? Is it wierd that I have my BOV on my hot pipe? All the setups I've seen the BOV is on the cold pipe....Pls correct me if im wrong..
 
SergMSP said:
Yea but I want to stay with my setup or else I'll lose the Greddy BOV I already have on there, you know? Not only that, it's 795$ kid...mucho son...

Do you know if I just get the coldpipe alone, if i'll have problems ?? Is it wierd that I have my BOV on my hot pipe? All the setups I've seen the BOV is on the cold pipe....Pls correct me if im wrong..

I also have the bov on the hot side, check it out.
http://www.msprotege.com/forum/showpost.php?p=2470493&postcount=1

If you run the BOV on the cold side, the turkey should disappear.
 
Turkey on cold pipe or hot pipe??

rocketr2 said:
I also have the bov on the hot side, check it out.
http://www.msprotege.com/forum/showpost.php?p=2470493&postcount=1

If you run the BOV on the cold side, the turkey should disappear.

But don't you get the turkey on either pipe? Does the BOV sound/perform better on the cold pipe???

Do you know where I could get a cold pipe besides **********'s $200 one?

Thx again, Serg
 
fyi there isnt a performance improvement from the cold side hard pipe. It doesnt expand really since the IC cools the charge. ive had it and sold it. Corky bell found no gains with it either. they do look nice though.
 
SergMSP said:
...

Do you know where I could get a cold pipe besides **********'s $200 one?

Thx again, Serg
I picked up only the hotpipe from a forum member. Keep a lookout in the FS section. Personally, I've only seen Cullen selling the new pipes separate.
Somebody else can chime in to let us know if there are others?
 
decided to go with custommsp SMIC and hardpipe from SU..
 

Attachments

  • S4021204.webp
    S4021204.webp
    33.6 KB · Views: 188
  • S4021205.webp
    S4021205.webp
    42.4 KB · Views: 180
  • S4021206.webp
    S4021206.webp
    39.9 KB · Views: 176
  • S4021203.webp
    S4021203.webp
    37.1 KB · Views: 181
Last edited:
Dugg E Fresh said:
That's a dual setup then? One recirculating and one venting? Turkey? Stalling?

actually i am only venting! no stalling but have the BOV setting on pretty hard...waiting on reflex bpv i ordered to finish dual valve setup...keep you posted
 
Back