Well I finally got around to reinstalling my audio, I wanted to post this up here for others future reference.
First up is the component install in the front doors, it's a Infinity reference 6000cs component set
Pic 1 - Speaker mounted in the wood plate I had in the door beside the new aluminum plates I made
Pic 2 - Speaker mounted in door with wires all ran
Pic 3 - How the crossover would be sitting if I didn't run out of double sided tape, you can also see the speakerwire ran into the door, works just fine like that and never gets pinched
Pic 4 - Infinity tweeter in stock location, it was alittle bigger so I had to break off the tabs on the interior peice and use hot glue to put the tweeter in place
Pic 5 - Just showing the fuseholder and wire ran
First up is the component install in the front doors, it's a Infinity reference 6000cs component set
Pic 1 - Speaker mounted in the wood plate I had in the door beside the new aluminum plates I made
Pic 2 - Speaker mounted in door with wires all ran
Pic 3 - How the crossover would be sitting if I didn't run out of double sided tape, you can also see the speakerwire ran into the door, works just fine like that and never gets pinched
Pic 4 - Infinity tweeter in stock location, it was alittle bigger so I had to break off the tabs on the interior peice and use hot glue to put the tweeter in place
Pic 5 - Just showing the fuseholder and wire ran