what is that nut?

[Fede_italiano]

Guys,

What is that bolt in the factory Jpipe?
How many o2 sensors there are in a stock MSP?

I was wondering if I could use that position to run a wideband and if there s enough clearance for it.

I will buy an apexi one or mam really soon.
I hope.

 

[orng1]

I don't know but it looks like an o2 fits there.

 

[smo0f]

o-tizzle fo shizzle

 

[Fede_italiano]

o-tizzle fo shizzle

But is tha actually a plug?
Is that 02 bung used?

 

[Fede_italiano]

But is tha actually a plug?
Is that 02 bung used?

i found this:

You can install it on the stock exhaust, and you don't need to have a new bung welded on. If you look at your J-pipe, there is a large bolt in the pipe. It's there because Mazda used the same J-pipe and cat that the original Protege uses, and that's where the 2nd O2 goes in the original Protege. It's where I installed my Zietronix before I got my Vibrant exhaust.

He is talking about that place?

 

[MrDiggler]

Sure sounds logical for me. I'd go take a look, but my J-pipe is in the attic.

Just watch out for the nut behind the wheel.

 

[Kooldino]

Rush told me that she installed her WBO2 there, so you should be good to go.

 

[Fede_italiano]

Rush told me that she installed her WBO2 there, so you should be good to go.

Thanks guys.
Are all 02 sensor the same?
I am geeting zeitronix and I was wondering if it would fit?

 

[Blue_Speed]

^ yea universal fitting.

 

[tekkie]

I had my WB installed in there for a while also without any issue

 

[Kooldino]

Thanks guys.
Are all 02 sensor the same?
I am geeting zeitronix and I was wondering if it would fit?

Well, the threads for the sensors are the same, at least.

Most WBO2 sensors out there are Bosch sensors that are sold with various gauges, but they all have the same diameter and thread pitch.

 

[BradC]

Man, our stock exhaust looks so pathetic in pictures...should be on an N/A 1.6L...bah!