Crank pulley and Cam Gears

[TurfBurn]

does anyone have a good set of pictures for the cam gears and/or the crank pulley (Mazda 3i and 3S). I need to see them visually to get some info for the Microtech stuff we are doing. Any help you guys can give is appreciated!

Thanks,

Steve
NSN Motorsports, LLC

 

[Captain KRM P5]

what kind of pictures do you need? i have a set of gears sitting at home.

 

[TurfBurn]

I just need to see if they have the nubs in the same spots roughly as on the Protege... basically figuring out how the cam sensor operates on the 3 versus the protege...

Same thing and reason for the crank pulley... I've heard it is the same but really need to be sure!

Thanks!

Steve

 

[sok07]

Would this cut-away view of the 2.3L help?

http://www.dieselstation.com/wallpapers/Mazda-3-Axela/Mazda-3-Axela-037.jpg

 

[mazda3zoom]

does anyone have a good set of pictures for the cam gears and/or the crank pulley (Mazda 3i and 3S). I need to see them visually to get some info for the Microtech stuff we are doing. Any help you guys can give is appreciated!

Thanks,

Steve
NSN Motorsports, LLC

ive got my motor completely torn apart and sitting in boxes, if you dont have a pic by tomorrow ill take pics and post em for ya.

 

[mazda3zoom]

actually tell me if this one helps at all......
http://www.msprotege.com/forum/attachment.php?attachmentid=60954

 

[TurfBurn]

Would this cut-away view of the 2.3L help?

http://www.dieselstation.com/wallpapers/Mazda-3-Axela/Mazda-3-Axela-037.jpg

Tells me I'm forbidden...

 

[TurfBurn]

actually tell me if this one helps at all......
http://www.msprotege.com/forum/attachment.php?attachmentid=60954

A little, but not enough.. I need to be able to count the teeth on the crank pulley.. and I need to see what the cam sensor is registering off of on the cam gears... the cam sensor is in your valve cover similar to on the Protege right?

 

[mazda3zoom]

A little, but not enough.. I need to be able to count the teeth on the crank pulley.. and I need to see what the cam sensor is registering off of on the cam gears... the cam sensor is in your valve cover similar to on the Protege right?

Yea, its inbetween the cams, and ill take a better pic for ya tomorrow. ill even throw in one of the sensor for free....

 

[mazda3zoom]

if you wanted i could mail you the cams so you dont have to look at pictures all day.

 

[TurfBurn]

That'd work.. otherwise all I'm after is to figure out what the signal will look like... basically need to know how many nubs are on the gears, where they are (aka BTDC etc). But cams would certainly do it! Whatever works best for you.

Any reason the motor is totally diassembled?? Hopefully not anything bad.

 

[sir_bob]

Check here

Maybe this will help with camshaft and sensor info:

http://www.midwestcarclub.com/mazda/manual/

 

[mazda3zoom]

That'd work.. otherwise all I'm after is to figure out what the signal will look like... basically need to know how many nubs are on the gears, where they are (aka BTDC etc). But cams would certainly do it! Whatever works best for you.

Any reason the motor is totally diassembled?? Hopefully not anything bad.

yeah its out cuz i blew it, but i found another one for $1500 and almost BRAND NEW!

 

[CarbonMz3]

are we getting some cam gears for x-mas?

 

[TurfBurn]

are we getting some cam gears for x-mas?

Nope, but you will likely be getting engine management for new years.

 

[TurfBurn]

I actuallly see now from the manual that it looks like it triggers the cam sensor off the #4 end of the cam rather than from the #1 end at the gear.

 

[TurfBurn]

Maybe this will help with camshaft and sensor info:

http://www.midwestcarclub.com/mazda/manual/

definitley helping! there used to be pages with oscilliscope wave forms in the manual too.. not seeing them so far in this manual, but it is helping a TON!!

Thanks!

 

[TurfBurn]

Sir Bob and mazda3zoom... you guys are officially my heros... I have everything I need now. I'll mark you guys down for free shipping and 5 dollars off any order for you guy at any point for anything but autometer gauges (sorry.. I make about a buck on each gauge with shipping. LOL).

 

[TurfBurn]

Below is the information I needed, and now officially have

 

[BC3I]

you don't think u will be making any cam gears for the 2.0L do ya?? cause i already have pulleys...