Post picts of your turbo set up

[viral_override]

Post picts of your turbo set up/ and Ill make a calendar for ya

Hey everyone, just bought Bryan's old turbo kit (Asian6er) and I am going to do the install soon. Can you guys post some pict so i can take a look at your set up?

And do I have to upgrade the injectors and clutch right away...or is this a suggested thing to do...lol

Thanks guys!

 

[Padre]

Here are a few pics of my kit installed, however it is a MAM SS kit so It may not help as much with your install.

As to answer your Q's, it would all depend on how much boost you are planning to run. If you are running 6ish pounds, you will not require upgraded injectors. However, I do not see any form of fuel control in your pictures. You will need at least a voltage clamp, FPR & possible upgraded fuel pump to add additional fuel under boost conditions.

The clutch will eventually be required also, some people on the forum have had good luck with the stock clutch lasting for a while, however may have found that after a few hard pulls the stock clutch will begin to slip.

Hope this helps.

 

[dominoy2k1]

 

[peepsalot]

domnioy, your wastegate just dumps the exhaust under the hood?

 

[dominoy2k1]

it did for a while. got it hooked up with a dumptube now.

 

[viral_override]

Thanks Padre!...just bought some 440's from Woody and theres a Walbro fuel pump in the back there. I am getting the Greddy Emanage...umm sorry for the dumb question...what does the voltage clamp do?

 

[THEGOLDPRO]

yeah i know its dirty.

 

[Matthew]

http://www.turboprotege.org/

 

[THEGOLDPRO]

nice matthew

 

[Matthew]

thanks, needs updating, but ive just been too busy to jack with it.

 

[THEGOLDPRO]

sweet, looks kick ass. get it dynoed?

 

[Matthew]

nah. wish i could go to the dyno days beau is having, but being in the army makes it too difficult to get there and back (12 hrs)

 

[THEGOLDPRO]

yeah i feel you, either way it looks sexy,

 

[Matthew]

thanks again! nice BOV btw i have the same one, but mine's under the turbo.

/threadjack

 

[THEGOLDPRO]

lol yeah semi thread jack, its a good BOV, soungs real good.

 

[Padre]

what does the voltage clamp do?

The voltage clamp prevents the ECM from seeing how much extra fuel you are adding when under boost conditions. It does this by sending a stoich signal to the ECM when you hit boost conditions. It is connected to the signal wiring coming from the front O2 sensor.

 

[KzA]

https://www.msprotege.com/members/KzA/p1010004.jpg

 

[Protege2K]

Mine.

 

[Pretzellogic]

Subscribing.

I'll post pics when I get my new intake from Juan.

 

[ddogg777]

Here is my turbo kit from MAM. It's the thumper.