alright people I have eibach springs right now I want to go lower it looks like my next option is tein s spring is it really gonna show a difference in looks it just looks like the rear in my car is freaking high with eibachs here is a pic of my car any opinion on observing the pic if I put on teins s springs will it lower my car more? I'am also buying some tokicos but to be honest I think my rims are the ones that is making my car look not lower at all in the rear here see what you guys think
Judgement On Looks
- Thread starter nalspeed
- Start date
hawaiian_msp
Member
- :
- Boosted Familia
doesn't look bad... (shrug)
ZeroAccess
Member
Yea doesn't look bad at all to me,
How long have they been on the car?
Enough time to settle a little bit?
Also, If your planning on adding a kit remember that most kits have less clearance than stock.
How long have they been on the car?
Enough time to settle a little bit?
Also, If your planning on adding a kit remember that most kits have less clearance than stock.
Shorebroke
M-Spec's Young Gun
- :
- 02 LX
well, i have the Tein S Springs on my car, and i have the same problem as you. My back rides higher than my front, which makes it look awkward. As for difference in looks, mine looks quite the same drop as yours. I'd say, if you have the money, save up for some coilover/strut combos, or a full coilover system, which is what i'm saving up for.
Roywhitep5
Member
- :
- 2007 350z
http://www.msprotege.com/forum/attachment.php?attachmentid=35060
i hear ya about the rear
the springs that i've seen with the best looking rear are h&r's
i hear ya about the rear
the springs that i've seen with the best looking rear are h&r's- :
- 2003.5 Titanium MSP
Coilovers are really the best option. Kinda pricey, but the best way to go since you can adjust it to how you want it.
ZeroAccess
Member
How do these cars get away with no camber kit!?
factory built in one?
factory built in one?
- :
- 2003.5 Titanium MSP
yeah
ZeroAccess
Member
no uneven wear patterns though?
ZeroAccess
Member
no I meant with the camber, I'm just amazed that a 2" drop doesn't need a camber kit
a 2" drop on a Honda..and ur tires look like \ hehe
Yea the toe on my car got smacked out when I lowered it also
My friends crx was WAY!!! out made the car act all funny and shreaded tires like there was no tommorow
Edit: gotta say I laughed at your quote "My mazda team member gets your girlfriend pregnant" ...ok done
a 2" drop on a Honda..and ur tires look like \ hehe
Yea the toe on my car got smacked out when I lowered it also
My friends crx was WAY!!! out made the car act all funny and shreaded tires like there was no tommorow
Edit: gotta say I laughed at your quote "My mazda team member gets your girlfriend pregnant" ...ok done
haha nice...
anyways. the reason we dont change camber much is the type of rear suspension we have. its just the geometry of it.. hondas use totally different geometry, they do go way the **** out.. most places either wont align a lowered honda, or do it for considerable cost... they are a joke unless you get camber correction.
anyways. the reason we dont change camber much is the type of rear suspension we have. its just the geometry of it.. hondas use totally different geometry, they do go way the **** out.. most places either wont align a lowered honda, or do it for considerable cost... they are a joke unless you get camber correction.
ZeroAccess
Member
Yea Butler tire did my alignment,toe,camber for...65 dollars I wanna say
But I put my own camber kit on (spacers in the back) kit in the front...
did really good on my own was only off by a few mm's
But I put my own camber kit on (spacers in the back) kit in the front...
did really good on my own was only off by a few mm's
