Recent content by bauer

  1. B

    Greddy E-manage for the MSP!

    yeah just fixed everything works great but somehow my iac valve is ****** up. i used the pcv for my bov, then on friday morning around 10am my car idles badly. I have to put a vacuum leak just to raise the idle. We finished tuning arounf 3am friday. pulls great at 10psi
  2. B

    Greddy E-manage for the MSP!

    yep i did solder mine but it only affects the maf input. i'm having problems with the maf output. it read .08 volts
  3. B

    Greddy E-manage for the MSP!

    Viral: guess have to check the wirings again. And i think my egr and iac has some problems i'll put it back after cleaning it and see what happens i'll keep you updated on the emanage set-up since my ecu is different from all of you.
  4. B

    Greddy E-manage for the MSP!

    viral: your car doesnt start also? i changed plugs so far the car runs better but still doesn't idle. i have to keep on pressing the gas pedal and my maf out is high it's around 2.80 while the maf in varries
  5. B

    Greddy E-manage for the MSP!

    ^^ same with mine. though i have my maf after the bov and before the tb. i do have the pressure seonsor.
  6. B

    Nex Full Coil-Over Set up

    does golden apple have a website or an e-mail?
  7. B

    GI: Transmission Gearsets

    subscribing
  8. B

    Greddy Turbo Timer Problem

    got the turbo timer working. the car has two ignition wires so what i did was hook the acc wire of the timer to the other ignition wire.
  9. B

    EBC pads for mp3?

    is there any ebc brand of brake pads for the mp3? like the green stuff and the red ones?
  10. B

    Stock MSP brakes

    but the caliper is still 1pot?
  11. B

    Stock MSP brakes

    is the stock msp brake system the same as the mp3's? if not will it fit the mp3's and where can i get them?
  12. B

    Greddy Turbo Timer Problem

    I had my greddy turbo timer installed. when i turn the ignition off, the engine will just turn-off while the timer is counting but the accessory is on. on the other hand when i turn the ignition on while the timer is counting down then turn the ignition off, then that's the time the engine...
  13. B

    will the mazda3 stock brake system fit on the mp3?

    so the msp brakes are bigger than the m3's? can the m3's be bolted on directly?
  14. B

    will the mazda3 stock brake system fit on the mp3?

    whats the difference with the msp's brake system? i don't think i can get it here in the philippines
  15. B

    will the mazda3 stock brake system fit on the mp3?

    the mazda3's has a pcd of 5/114.3 is it possible to put their brake system front and rear to the mp3? with minor modification. since the calipers are bigger as well as the rotors. it would be a great upgrade than getting big brake kits?
Back