The Ohio Random Thread... aka We Should Probably Be Working
- Thread starter THE Phen
- Start date
i may be going with a junkyard engine when i do the swap... Columbus pick and pull seems to have a few KL's at any time... of course, those cars are in the junk yard for a reason. Any thoughts on junkyard engines? I'm Still waiting for my current autoBox to die before i can do anything, and then i'd feel bad for the FS if i ditched it 
For the wiring i plan on running a tangled up harness/double computer mess
A couple inches of snow here in columbus... but it's stopped now. should be all gone by the weekend, but that still leaves thursday and friday for hiking
For the wiring i plan on running a tangled up harness/double computer mess
A couple inches of snow here in columbus... but it's stopped now. should be all gone by the weekend, but that still leaves thursday and friday for hiking
A junkyard engine is a gamble but their prices reflect that. I got my last KL for ~$680 shipped to my door from an online shop and it's pretty clean though hasn't ran yet. My first one was ~$900 shipped and is still running strong in my Milly. That's why I'm not bothering forging the KL, if it pops I'll just swap in another one. 
See, since we're all car enthusiasts we can all drive pretty well and have a understanding of vehicle dynamics in snowy conditions. I've never gotten stuck before. It's all the other morons we have to share the road with that make me nervous. I'm constantly saying to the other drivers "Pleeeeeaaaase don't slide into me, you putz.". haha
But regardless, you're right, Sho. Be safe out there with all your driving around, buddy.
But regardless, you're right, Sho. Be safe out there with all your driving around, buddy.
yea, i have been checking the traffic cams on www.buckeytraffic.org, as well as went into town at lunch, and its pretty slick out there
Yeah, my biggest worry is always everyone else on the road. People just dont understand how physics work, and next thing you know; you have someone sliding towards you in a giant SUV with no idea how to control their vehicle.
Fiji Mazda3
Member
- :
- 2014 Ford Focus ST
Got home at 4. Left early.
Roads are okay in Columbus. Snow tires work wonders on secondary roads.
Roads are okay in Columbus. Snow tires work wonders on secondary roads.
lewis- what axles did you use (or could you use) for your KL swap? protege axles won't fit into a transmission off a KL car right? Wrong spline count and from what i can tell the intermediate shaft from the protege won't bolt up to the KL-DE without modification...
...or was it a KL-ZE that the intermediate shaft mount wouldn't bolt up to...
Over on clubProtege i looked at some guys attempt to slap a KL into an old BF protege. He used a KL's transmission, but all the 28-spline axles from a probe, mx-6, or mx-3 gs were too long and he had trouble with his half shaft binding up... and some other problem with the 28-spline intermediate shaft not working with his protege 26-spline half shaft.
His other option was to put his old protege diff into the KL's transmission and use all the protege's axles... but he couldn't do that for some reason... or maybe he didn't want to.
Also... that was a BF protege... maybe our BJ proteges are a bit wider and we wouldn't have axle binding issues when using a v6 car's axles?
Maybe i skimmed over the answer to my question somewhere... i've been looking at stuff about the swap all week- i'm mostly concerned about wiring, but it doesn't sound as hard as wiring's made out to be, so now i've moved on to "wtf do i do for axles."
Next week: "wtf do i do for the fuel lines"
...or was it a KL-ZE that the intermediate shaft mount wouldn't bolt up to...
Over on clubProtege i looked at some guys attempt to slap a KL into an old BF protege. He used a KL's transmission, but all the 28-spline axles from a probe, mx-6, or mx-3 gs were too long and he had trouble with his half shaft binding up... and some other problem with the 28-spline intermediate shaft not working with his protege 26-spline half shaft.
His other option was to put his old protege diff into the KL's transmission and use all the protege's axles... but he couldn't do that for some reason... or maybe he didn't want to.
Also... that was a BF protege... maybe our BJ proteges are a bit wider and we wouldn't have axle binding issues when using a v6 car's axles?
Maybe i skimmed over the answer to my question somewhere... i've been looking at stuff about the swap all week- i'm mostly concerned about wiring, but it doesn't sound as hard as wiring's made out to be, so now i've moved on to "wtf do i do for axles."
Next week: "wtf do i do for the fuel lines"
RedRyderBB6
Member
- :
- 2006 VRM Mazdaspeed6 GT
We probably got nine inches of snow where I'm at, supposed to be another storm coming on Sat. Hopefully that isn't too bad. I was down around Mount Carmel East today and the roads were just nothing but slush and patches of ice, hopefully everybody made it home safe!
Rockin03mp5
Member
- :
- '13 Mazda3 / '13 Edge / Your Mom
that jersey is really sweet! I want one!
also, the snow wasnt bad... but man people are slow drivers. really... going 25 on the interstate? how about take the service drive! or stay home.
also, the snow wasnt bad... but man people are slow drivers. really... going 25 on the interstate? how about take the service drive! or stay home.
Coppertone
Member
- :
- '04 Mazda6s Hatch
I'd say we got upwards of 8" ... we shoveled the whole driveway when i got home at 430p yesterday and overnight we got another couple of inches ... the city plow finally came by for the first time at 5am today! So before Marlon left at 7am for work I shoveled out the end of the driveway : / and reshoveled and salted the right side so our one wheel will at least get traction : ) I'm done shoveling! Is it spring yet? On a positive note, the days are now getting longer : )
Last edited:
New Threads and Articles
-
-
-
For Sale Got tons of extra parts for mazda protege protege5 engine 2trans- By JP mp5 VA
- Replies: 0