What have you done to your MSP today?

[fatti03msp]

hay do you guys know if Xcelerated concepts is still around? Also isnt there someone that works for them on the forum?

Finally going to be able to get me the reverse cowl hopefully

 

[SCMP3]

They sure are nice

 

[Jaleik]

I know their website has been down for a while but I think they are still around. Look them up on facebook.

 

[StealthWyvern]

They sure are nice

.. and on that note... gimmie joo hood!

 

[fatti03msp]

I know their website has been down for a while but I think they are still around. Look them up on facebook.

wasnt he like crazykracker or something on here? I checked out there facebook and there is no email and you cant post anything.

 

[2.0t03speed]

Xcelerated concepts has been out of business since last summer.

 

[Preferio]

Picked up the 03.5 wing last night, dropping it at the body shop tomorrow morning. Still waiting on the AWR's from PG. PM'd someone about a SSAFC and might have my "custom" 3" exhaust done this week. I might as well take all my money and throw it out the window as I'm driving.... LOL

 

[SeR_Cyclops]

Who made Rich's hood?

 

[2.0t03speed]

Xcelerated concepts but it was done before they closed shop

 

[destineal]

Found a vacuum port on the 626 manifold unoccupied. Took care of it, but now have a p0300 code now. DOes anyone have pics of the 626 manifold or know the number of vacuum ports on it?? 5? Can I stick a hose in the gas tank to drain it, or is it blocked off?

 

[Dpwhitehead1]

Found a vacuum port on the 626 manifold unoccupied. Took care of it, but now have a p0300 code now. DOes anyone have pics of the 626 manifold or know the number of vacuum ports on it?? 5? Can I stick a hose in the gas tank to drain it, or is it blocked off?

p0300 is a random missfire.. clear the code, and try again. it was prolly missfiring cuz of all the s*** you had going on there.

 

[SeR_Cyclops]

Xcelerated concepts but it was done before they closed shop

That sucks because his hood is so freaking amazing!

 

[Jaleik]

Yeah a vacuum leak on the IM can definitely cause a random misfire.

 

[Wagonbacker9]

Yeah a vacuum leak on the IM can definitely cause a random misfire.

+1. How is it running now with proper vacuum?

wasnt he like crazykracker or something on here? I checked out there facebook and there is no email and you cant post anything.

crazycaker

 

[hornsfan10609]

why would you drill a hole in your actual dash and not the removable plastic piece that's 4" away

Give me a little credit! The PO did that, he put two round switches in, one switch in one of the switch blank things and another right in the dash. So I replaced the blanks and made the hole have a function so it didn't look as retarded. I've got screw holes in my B pillars too, stupid neon bulls***.

 

[hornsfan10609]

Look at Hornsfan listening to "Forgot About Dre"

(detect)

Do you have a wideband?

Yep an Innovate MTX-L, everything reads normal, 11-12s WOT and 14.5-15 idling and cruising.

 

[destineal]

No proper vacuum. Just random misfires. I'm wondering if the gas finally degraded enough to be bad since it is old.

 

[evilmonkeyMSP]

Ok guys....need some help figuring out where to start here.

For whatever reason when I turn on the AC with the HVAC controls nothing happens. No cold air, I dont hear the compressor kick on and the fan does not turn on. I'm assuming its electrical?

Where should I start?

FYI, the radiator fan works fine.

 

[hornsfan10609]

See if the small ground connector for the AC compressor is hooked up, it's the single black wire that runs off the engine harness over the PS pump and down to the AC comp. Otherwise yeah it's probably a loose connection, bad relay or bad fuse. If you have removed the panel recently make sure you hooked up both of the cables that run behind the dash, I realized the other day I forgot to hook up the driver's side cable for who knows how long.

Also maybe try refilling the system, sometimes they act up when they are low on Freon. I fill mine with the R134a cans from the parts store.

 

[2.0t03speed]

Ok guys....need some help figuring out where to start here.

For whatever reason when I turn on the AC with the HVAC controls nothing happens. No cold air, I dont hear the compressor kick on and the fan does not turn on. I'm assuming its electrical?

Where should I start?

FYI, the radiator fan works fine.

does the a/c light turn on?