Hub Centric Wheel Spacers

UPDATE: NOW SHIPPING!

Since I know some people have been looking for wheel spacers lately, I took it upon myself to do some investigating and some research. I have purchased an old set of Turfburn's hub-centric spacers to compare to.

All of my spacers will be made to fit vehicles with a 67.1mm bore and a 5X114.3 bolt pattern. These will fit: Protege, Mazda3, Mazda6, and possibly other vehicles. They will be made of aluminum and made to order. Here are the details:

3mm (1/8") spacers: $25 a pair

5mm (3/16") spacers: $30 a pair

8mm (5/16") spacers: $40 a pair

I will offer a $5 discount if you order a full set (total of 4) of either 3mm, 5mm, 8mm, or mixed. I can also make these in different sizes, such as 10mm, by request (extra charge). These prices are for the parts shipped.


PAYMENT: For those in the US, please send your payment to the PayPal email address "outrage_display@hotmail.com". Please include your Mazdas247 username and your desired spacers. For those outside of the US, please PM your shipping address and I will get a shipping quote ASAP (I will cover the first $5). Also, this is not my primary email, so if you have any questions and/or do send payment, please PM here so I am notified right away.

 

[peavey]

Sorry for the lack of updates, been busy as hell the past 2 weeks... 12 hr days. I did get enough 3mm and 5mm spacers completed to be able to ship this coming week, and *hopefully* enough 8mm for all who have payed.

are you still open to 8mm spacers orders?

 

[blinduno]

sorry again that ive been MIA for a while. just PayPal'ed you the $

 

[azuelke]

I now have a bunch of spacers ready to ship, in all sizes. All have been test fit on my P5.

are you still open to 8mm spacers orders?

Yup, I have extras made.

sorry again that ive been MIA for a while. just PayPal'ed you the $

Not a problem.

 

[JDMJNKY]

Will have payment for full set of 8mm's by the end of the week

 

[JoseProte83]

Post pictures of before and after guys!!!

 

[azuelke]

Payday BUMP! Still have a few extras that could ship ASAP (cabpatch)

 

[blinduno]

just got mine in the other day. thanks for shipping them out so quickly!

 

[tonyzoomzoom]

^^^ that was fast! hopefully mine will be here soon

 

[azuelke]

just got mine in the other day. thanks for shipping them out so quickly!

Already? Damn, that is fast... enjoy!

 

[Peter5]

hey , what kind of spacers should i order for stock mags on a protege5 2002 to get flush without havin to roll my fenders ?
thx guys

 

[justanothermp5]

for the stock 16's youll need probably 15 or 25mm spacers

 

[Peter5]

wow thats alot , Azu should sell wheel studs 2 haha !!

 

[Wagonbacker9]

justanother is giving the spec to basically make the wheels poke. if you want to put in a reasonable spacer on the stockers I would say 8mm would plenty.

 

[justanothermp5]

he said flush without rolling fenders...and im not sure if you've ever seen the stock 16s, but they are super sunk, 8mm wont do much at all

 

[marcs_sp20]

Ok just making sure, So with 18x7.5" rims +50 offset, will I need to roll the fenders for 3mm spacers?

 

[justanothermp5]

are you talking about the wheels you have in your sig?
looks like your pretty close to the wheels, so i would take a ruler and measure to be sure

i know my 17x7.5 +48 wheels had some space (rears are already rolled to fit bigger tire), but not sure about 18's....i think you may need a roll

 

[Mazdaspeed2oo35]

is there any 10mm Hub Centric Spacers available for sale ? is so do they sell them with Longer Studs or.... Where can i get them beside here getting the Spacers it self.. ????????

I only need 10mm for the rear with longer studs and some 20mm Built in Studs for the front...

by looking at the pics i dont see any lip on the spacers, I assume the thicker the Spacers the need for the Lip ? those the 10mm comes with the Hub Centric Lip ?????

 

[Wagonbacker9]

is there any 10mm Hub Centric Spacers available for sale ? is so do they sell them with Longer Studs or.... Where can i get them beside here getting the Spacers it self.. ????????

I only need 10mm for the rear with longer studs and some 20mm Built in Studs for the front...

by looking at the pics i dont see any lip on the spacers, I assume the thicker the Spacers the need for the Lip ? those the 10mm comes with the Hub Centric Lip ?????

With the HP of your application, seriously dude, just buy a set that fit the way you want. you cannot in good conscience put a 20mm wheel spacer on a car making that kind of power.

Ok just making sure, So with 18x7.5" rims +50 offset, will I need to roll the fenders for 3mm spacers?

I've run 16x8 +50 with a 3mm spacer and had NO problems clearing a 245 tire up front, and only rubbed a TINY bit in the back on a 225 tire, but my fenders were kinda pre-rolled because the previous owner put a stupid fitting wheel on the car. so, you'd probably need to roll the rear (less clearance on the P5) unless you go with a 215 or smaller tire (please don't!)

 

[justanothermp5]

why wouldnt he go with 215? thats the perfect size for 7.5",
plus he's on 18's, he's not trying to fit drag slicks on 16's like you

 

[marcs_sp20]

I should have posted earlier, I am running 215/35 tyres...

Theres around 10mm of between the guard & lip of the rim...