What have you done to your MP3 today???

[ucMP3]

I do now. http://www.msprotege.com/forum/showthread.php?t=123776997

subbed.


My lo-beam HID kit came in the mail today as well as a new battery tie down. (2thumbs)

 

[Kooldino]

Friday night I wet sanded and buffed out my foggy driver's side headlight, and detailed the car.

 

[ucMP3]

So I'm about to install the 3000k (yellow light output) HIDs in my foglights, when they come in the mail. My question for you all: should I get yellow lamin-x overlays for my fogs too? Or just lave them be? Do you think they will look good against yellow paint?

 

[MP3Night]

Washed the MP3 Today

 

[LinuxRacr]

Just changed the oil. This is the first time I've used something other than Redline oil, since May, 2003, when the engine was put in!

I'm trying this stuff out: http://www.mobiloil.com/USA-English/MotorOil/Oils/Mobil_1_Turbo_Diesel_Truck_5W-40.aspx

 

[ucMP3]

Got my B&M shifter in yesterday. Waiting on UPS to deliver my CS shift linkage bushings...

I'm gonna try to ignore the pile of new parts I have sitting in my room and finish one of my unfinished projects sitting around the apartment this week/weekend...

 

[LinuxRacr]

Changed out the spark plugs today...

 

[Tzar177]

Changed out the spark plugs today...

Which to which?

 

[pat_neumerz]

Ordered swaybar endlinks because all the bolts are stripped on my currents and i cant replace the bushings because of it. When they come in im firing up the saw..

 

[ucMP3]

Ordered swaybar endlinks because all the bolts are stripped on my currents and i cant replace the bushings because of it. When they come in im firing up the saw..

You can replace the swaybar bushings without removing the endlinks... But you probably need new endlinks anyways, so proceed.

 

[LinuxRacr]

Which to which?

NGK ZFR7F-11 (What I always use for higher boost...)

 

[ucMP3]

Now, I haven't done the measuring yet. Just trying to get ideas currently. But do you guys think something like this would fit/work in the Protege? I'm not sure what route I want to take, but I'm tired of my leather shift boot.

http://www.hurst-shifters.com/hurst...1bb82c839a09614.e3eSchaRch4Re34Pa38Ta38Lbxj0#

Or even something like this:

https://www.amazon.com (commissions earned)

*Edit: Ok, I just found this:

http://www.cravenspeed.com/products/MINI-Shift-Well-Cover.html

I want it. Which vendor/sponsor could make this for the Protege?

 

[Tzar177]

NGK ZFR7F-11 (What I always use for higher boost...)

I thought the ZF plugs were bad for turbo/higher boost? Should I use ZF plugs on my build running 6-7 psi?

 

[ucMP3]

I thought the ZF plugs were bad for turbo/higher boost? Should I use ZF plugs on my build running 6-7 psi?

Yes, they are better plugs hands down. You probably only need a 6 heat range plug tho. 5 for n/a, 6 for stock msp setup, and 7 for higher boost applications.

 

[jonridinhi]

I drove mine today. Well that is exciting for me.

 

[323]

is it now lol..

 

[jonridinhi]

hush your mouth, unless the msp guys kicked you out for your lack of PSI

 

[323]

all proteges at the end of the day....... dont let the different wing, lip, and wheels and the last minute turbo kit fool u

 

[ucMP3]

They're all slow

*fixed.

 

[Tzar177]

Yes, they are better plugs hands down. You probably only need a 6 heat range plug tho. 5 for n/a, 6 for stock msp setup, and 7 for higher boost applications.

.035 gap still?