What have you done to your MS3 today?

[rsvinylgraphics]

any one ever removed the antenna base from the roof? looks like i might have to peel back the headliner inside....?

http://www.mazdas247.com/forum/showthread.php?t=123774313

 

[Nliiitend1]

any one ever removed the antenna base from the roof? looks like i might have to peel back the headliner inside....?

To do it right (without creasing your headliner/interior ceiling) you have to remove the entire thing.

It's quite an ordeal.

 

[8.5MS3]

picking it up from the dealer.....no new turbo for me(flame)

 

[LittleRedWagon5]

Then why mis-label it as dry carbon when you obviously know that it is not?

well pardon the **** out of me. I appologize for misleading the whole Mazdas247 community with my outrageous accusations of having a carbon fiber roof. when in fact 99 percent of the people who read it probably figured it out in .02 seconds. Still my bad.I will give proper descriptions from now on as well as notorized affadavids of installation.

The product in fact is 3M Di-Noc Vinyl, it has the appearance of dry cf. that is waht i had my roof wrapped in .

 

[8.5MS3]

You lying son of a b****!!!!!!!!!!!!!!!!

 

[CBMrocket]

picking it up from the dealer.....no new turbo for me(flame)

still smoking? what did they say it was?

 

[boosted1]

I had a Tri-Point RSB installed today.

 

[boosted1]

picking it up from the dealer.....no new turbo for me(flame)

I had to take the car in twice and it smoked like a barn fire for them, at the second visit. I also have a leak at the oil line near the bottom of the turbo.

 

[8.5MS3]

time to fill a supersoaker with motor oil and shoot it up the exhaust lol

How bout now bitches??? smoking enough for you???

 

[mrdouble99]

Put stock wheel and waiting for my Cobb Sri and New AP

 

[chief_wiggum]

this, long overdue;

 

[bigdaddy]

well pardon the **** out of me. I appologize for misleading the whole Mazdas247 community with my outrageous accusations of having a carbon fiber roof. when in fact 99 percent of the people who read it probably figured it out in .02 seconds. Still my bad.I will give proper descriptions from now on as well as notorized affadavids of installation.

The product in fact is 3M Di-Noc Vinyl, it has the appearance of dry cf. that is waht i had my roof wrapped in .

hahaha, Dark sounds like a dick. We all know you cant wrap a roof in CF...well actually you technically could, but that would be wayyyyyyy to much money and effort for a Mazda...

 

[SKiZZ]

Put stock wheel and waiting for my Cobb Sri and New AP

http://img.photobucket.com/albums/v243/mrdouble99/P5060014-tiltshift.jpg

Tilt shift or post processing?

 

[SKiZZ]

this, long overdue;

A wash?

 

[MaikuMS3]

A wash?

i think he took off side moldings.

i need to do them too before the color fades.

 

[chief_wiggum]

A wash?

well, I did that too, but....

i think he took off side moldings.

i need to do them too before the color fades.

MaikuMS3 for the win! Yes, side molding off. Mine were on for about 20 months, came off in 90 seconds.

 

[MaikuMS3]

well, I did that too, but....



MaikuMS3 for the win! Yes, side molding off. Mine were on for about 20 months, came off in 90 seconds.

how did you do it?

 

[chief_wiggum]

how did you do it?

I let it sit outside on a warm day (~80), then grabbed the leading edge, pried it up a little with my finger tip and slowly pulled. It came off really clean, very very little residue. I followed with a good washing and then wax over where the moldings were. Now you cant tell they were ever there.

 

[MaikuMS3]

I let it sit outside on a warm day (~80), then grabbed the leading edge, pried it up a little with my finger tip and slowly pulled. It came off really clean, very very little residue. I followed with a good washing and then wax over where the moldings were. Now you cant tell they were ever there.

oh ok. i spread some residue remover for my mazdaspeed 3 emblem and it was a pain to take it off. i used hair dryer to warm it up and it was a bit easier after that.

 

[oaklandopen]

why do our cars have an accelerometer...is it for DSC for something???

pretty much. the accelerometer is a potentiometer that measures g-forces (in a nutshell)

all goes towards the dynamic stability control. which is why my little car with swurvy tire marks light stayed on till it was replaced