What have you done to your Mazda6 today?

[Worbit]

Im looking around trying to figure out my tint options too. My Pro5 had 35% all around and my MS6 is is a few shades lighter......I think I might bring it down to 35% again once I'm down tracking down an exhaust system

 

[tonymontana1204]

I have yellow HID bulbs to install in the low beams, I don't know if I'll like the look but lets see.

 

[tonymontana1204]

Installed the yellow HID low beams and amber city lights, don't know how I feel about them yet.

 

[tunersteve]

Just finished claying, polishing, and waxing the car, then cleaning the interior. Lots of work and my shoulder is sore, but well worth it. Car looks fantastic.

 

[Rez]

Clay, Wash, Wax, Detail...Looks absolutely fantastic...to me at least.

I used a product from turtle wax called "ICE clay bar liquid". I ran out of clay, and just bought this stuff to see how it worked. I don't normally use turtle wax stuff, but it seemed to work OK. Not enough for me to ditch the bar, but decent.









Next up is the engine comp. You are all making me jealous dammit!

 

[BoostedSpd6]

so mine wont start.. upon inspection of this.. seems like one of the OCC lines is pinched shut behind the manifold for some odd reason..with that said its probably airlocked because of that.. boo have to take it apart.. some input on this would be welcome.. everythings working properly.. damn pinched line

 

[Jay Davidson]

Rez, that thing shines up nice. White is a totally underrated color.

Are those MS3 wheels? This is the first time I've seen those on an MS6. They look great. They also look like they'd be a sight bit easier to clean than the stockers.

-Jay

 

[Qwik6]

How well are those yellow low beams at night?

 

[tonymontana1204]

How well are those yellow low beams at night?

I'll find out in about 10 mins, I'll post back. I've had yellow lows and fogs on my past car and I was able to see the future, we'll see how these do.

 

[BacDoc]

Who said that lower motor mount install was easy? :unamused:

 

[BoostedSpd6]

(bolt) not me (lol2)

 

[FORZDA 1]

so mine wont start.. upon inspection of this.. seems like one of the OCC lines is pinched shut behind the manifold for some odd reason..with that said its probably airlocked because of that.. boo have to take it apart.. some input on this would be welcome.. everythings working properly.. damn pinched line

You need a special spring wound doodad that fits over the hose to prevent it from pinching/collapsing when it bends. I bought a few (5/8") at Advance Auto for my CC install. The bend off the manifold nipple is too tight for a 5/8" hose.....

 

[coyfish]

Nice rez! but why the speed 3 wheels . . . eww !!

 

[Qwik6]

Who said that lower motor mount install was easy? :unamused:

It is easy!(outie)

 

[crlsnlopes]

It is easy!

+1. me on the other hand had some fun with the rear swaybar, cpe rdm and tt fdb. what an install day. those parts will never come off again(sorry no pics)
sunday installing this

 

[BacDoc]

This wishbone mount I got won't fit. The rubber catches and even with a little grease it won't line up. It's like 1mm to wide.

 

[crlsnlopes]

This wishbone mount I got won't fit. The rubber catches and even with a little grease it won't line up. It's like 1mm to wide.

i had the same issue..but i made it fit.

 

[BacDoc]

i had the same issue..but i made it fit.

I tried everything. I used a jack, pry bar, screw drivers, I even bent the frame mount back slightly. :mad:

 

[crlsnlopes]

I tried everything. I used a jack, pry bar, screw drivers, I even bent the frame mount back slightly. :mad:

thats exactly what i did. is it an awr mm..

 

[Qwik6]

I had to make mine fit as well. I think the clips on theinner part had to be cut for it to slide up in there nice. I just cut one side.