What have you done to your MSP today?

[StealthWyvern]

be careful with cheap t bolt clamps, they can strip out really easy
i bought legit clampco ones from extremepsi and i stripped 2 of them out

just by loosening them, they would loosen and then just stop turning, it was wierd
good thing i had extra

Thanks for the heads up. Either way I bet they are 10X better then the damn worm clamps.

 

[Ricktalife]

be careful with cheap t bolt clamps, they can strip out really easy
i bought legit clampco ones from extremepsi and i stripped 2 of them out

just by loosening them, they would loosen and then just stop turning, it was wierd
good thing i had extra

Was this done by using a flathead or a socket? I use a socket.

 

[justanothermp5]

socket, there t-bolt clamps, u cant use a screw driver lol

 

[Ricktalife]

socket, there t-bolt clamps, u cant use a screw driver lol

Oh I thought you could just like worm clamps. Well that blows, but I am looking at extremepsi.com now and I am curious if all their stuff is bad or what? I need some 1" silicone hose for my BOV such as this:

http://www.extremepsi.com/store/customer/product.php?productid=21499&cat=1534&page=1

Pretty expensive I know but I've been looking around and I would like to get silicone even if it is a little more. Any other websites you guys suggest?

 

[justanothermp5]

nah extremepsi has pretty good stuff, thats where i got all my couplers, clamps, oil lines, IC from
pretty good stuff IMO, i dont mind the price

EDIT: like shane said below, atp turbo is also a really good site

 

[shane02pro5]

treadstoneperformance.com
atpturbo.com

 

[StealthWyvern]

treadstoneperformance.com
atpturbo.com

Thanks shane! Anyone know the stub pitch an all that for the exhaust mani to head area? 2 bucks a pop seams more realistic compared to other places wanting 80 bucks for a kit.

http://www.treadstoneperformance.com/view.phtml?f_cat=Fasteners

 

[SCMP3]

injen cai just got here! going to install it

 

[bwalt]

Just installed the AXR clunk fix bracket on my MSP, it was the last one apparently they don't make em anymore. So far I'm happy, the rear end feels much tighter and steering is more predictable. Best of all the squeaking stock bushings from hell are gone!! Split Second AFC is next, can't wait till it gets here.

 

[03.5MSP]

K1 Technologies Connecting Rods (long rods)
Wiseco Pistons
(comes to about 8.8:1)
ACL Engine Bearing Kit
ARP Main Studs
ARP Head Studs
new idler pulley and tensioner
valve seal kit
Gates Racing Micro V-Belt (all the belts)

Machined block with .020 bored out.

Some of what is coming to me

How come you went with the long rods??

 

[Ricktalife]

How come you went with the long rods??

Increase in penis size.

 

[Outlawstar98]

How come you went with the long rods??

Wanted overbore. and not many people go with it and I like to be different.

 

[Outlawstar98]

Increase in penis size.

(sadbanana) I told you NOT to tell anyone!

 

[Wagonbacker9]

Just installed the AXR clunk fix bracket on my MSP, it was the last one apparently they don't make em anymore. So far I'm happy, the rear end feels much tighter and steering is more predictable. Best of all the squeaking stock bushings from hell are gone!! Split Second AFC is next, can't wait till it gets here.

he's running a GI for another GB for them now.

 

[SCMP3]

where is the gi thread?

and i love the injen intake. it sounds great and i feel a little more power up top. idk maybe im just feeling things lol.
next on the list is a thunder mani

 

[o0n8]

where is the gi thread?

wondering the samething

 

[xJAZx]

in the for sale section....

 

[Wagonbacker9]

in the protege for sale section....

lil more specificly...

 

[xJAZx]

give me a sec to find it

edit: http://www.mazdas247.com/forum/showthread.php?t=123769830

 

[o0n8]

thank you.

just heard from the body shop my car should be done tomorrow and they replaced my grills at the insurance company's exspense.