What have you done to your MS3 today?

[noobinacan]

washed
clay bar'd
waxed

 

[oaklandopen]

washed
clay bar'd
waxed

did you use too much elbow grease or somethign? lulz

 

[noobinacan]

did you use too much elbow grease or somethign? lulz

ha...yes. I spent like 3 hrs just on the outside...lol
and its gonna rain today..btw
I'll probably clean the inside a lil today

 

[Oneurt]

ha...yes. I spent like 3 hrs just on the outside...lol
and its gonna rain today..btw
I'll probably clean the inside a lil today

Lol always happens, haha spend all that time on the car to have it rain, or a bird crap on it.

 

[chief_wiggum]

Summer tires off...all-seasons on.

 

[hugador]

Lol always happens, haha spend all that time on the car to have it rain, or a bird crap on it.

I hate when that happens. Last sunday I washed my car and a soon as I pulled out of the garage mother nature decided to blow dirt all over. So I just said f*** it lol.

 

[liquidflem]

Last autocross of the season! Was first place (street tire - DS) after first heat (wet). Totally screwed second heat (last 2 runs).

 

[Saskatchewan17]

Replaced my horrbily cheap looking zip ties from the boost gauge install with worm gears... washed her up nicely, and found a spot of curb rash. (gah)
2 for 3 ain't bad in my book.

 

[Kain]

Summer tires off...all-seasons on.

Same here. Replaced the stockers with a shiatload of tread left (will go on sale for stupid cheap) with 235/40-18 Kumho Ecsta LX Platinums. So far so good: smooth, comfortable, quiet, and by going wider, I don't feel like I lost any lateral traction taking some spirited corners.

 

[dizzin9]

^

smart choice, i have that tire before.

 

[oaklandopen]

oil change, tire rotation. got about 3/32'' all around after 27k miles. brake pads are 8/32'' in the front, and 10 and 11/32'' in the rear

also took a look at a couple things while i was under the car and wanted the mazdaspeed suspension and mazdaspeed cbe. checked the mscai filter too and it's still on there and clean.

pretty much a general day of maintenance

 

[mr_mazda329]

oil change, tire rotation. got about 3/32'' all around after 27k miles. brake pads are 8/32'' in the front, and 10 and 11/32'' in the rear

also took a look at a couple things while i was under the car and wanted the mazdaspeed suspension and mazdaspeed cbe. checked the mscai filter too and it's still on there and clean.

pretty much a general day of maintenance

nice... i need to go out and wash my car. Its been 2 weeks since.

 

[RADAR THIS]

finished the hand job. (lol2) i mean paint job on the lip. now i am letting the sun bake it...lol my lips getting baked...

 

[Sport6]

Dyno'd the car yesterday. Will upload the scan of it tomorrow but here's the video.

264hp@5500/274ft-lbs@4700: Mazdaspeed CAI as SRI, Forge Bypass Valve (yellow spring, 1 shim). Hood closed

261hp/261ft-lbs was the first run with the hood open.e
http://www.youtube.com/watch?v=zxVr2slo4Dg

 

[mr_mazda329]

Dyno'd the car yesterday. Will upload the scan of it tomorrow but here's the video.

264hp@5500/274ft-lbs@4700: Mazdaspeed CAI as SRI, Forge Bypass Valve (yellow spring, 1 shim). Hood closed

261hp/261ft-lbs was the first run with the hood open.e
http://www.youtube.com/watch?v=zxVr2slo4Dg

nice numbers...sounds about right for a dynojet and your mods.

 

[Saskatchewan17]

CAI and BPV and that's it? Awesome numbers for just those mods.

 

[RADAR THIS]

i wish surgeline was closer

 

[Nliiitend1]

Rotated my NT-05s, cleaned and conditioned the leather (Zaino FTMFW!), and vacuumed/cleaned the interior.

 

[///M Compact]

I drove mine across town to look at a car I was interested in. It was crap(the other car- NOT the MS3)

 

[mr_mazda329]

Rotated my NT-05s, cleaned and conditioned the leather (Zaino FTMFW!), and vacuumed/cleaned the interior.

Where did you get your NT-05's?!?!