New MS3 - help me find the mods

[ALIEN3T]

Aaron23. I cant see the pic, But if its masking tape near the headlight. My sports has it still also, seams like it was a label for the people wiring it up. Usually i see a number on them. lol

 

[Aaron23]

looks like masking tape to me.

 

[Boostin McFly]

I went to check under my car to see how these bolts were doing. The drivers side looks to be a little loose too. Couldn't I just tighten this myself instead of going to the dealer?

Also, the white plastics looks to be bent...could I get a synopsis...is this normal or should i take it in?

 

[sxates]

My dealer replaced the whole thing - so I guess it was a matter not fixed by simply tightening the bolt... So it might be a good idea to let them take care of it, if for nothing else, to let them have the liability.

 

[Boostin McFly]

Damn...Even though I don't many mods I'd rather not take them off then put them back on for a dealer trip that could be easily avoided...I guess I'll bring it buy and see what they say then make an appointment a couple days later to take off my mods...

Any other thoughts?

 

[mr_mazda329]

I went to check under my car to see how these bolts were doing. The drivers side looks to be a little loose too. Couldn't I just tighten this myself instead of going to the dealer?

Also, the white plastics looks to be bent...could I get a synopsis...is this normal or should i take it in?

First pic is wrong. No washer/bushing in between the nut and swaybar needed. Nothing appears loose and the white plastic dust covers look fine.

 

[johns]

i have had this nut come loose on me as well.
i wonder if this happens with aftermarket end links?

 

[Boostin McFly]

i have had this nut come loose on me as well.
i wonder if this happens with aftermarket end links?

What did you end up doing to address this issue?

 

[Boostin McFly]

First pic is wrong. No washer/bushing in between the nut and swaybar needed. Nothing appears loose and the white plastic dust covers look fine.

This is how I got my car(bought it used). So I dont' have anything to be worried about or should I have the dealer or myself take the washer/bushing in between the nut and swaybar off to look like the passenger side.

 

[mr_mazda329]

Or you could do it yourself...save a trip to the dealer. Would take like 2 minutes tops.