MS6 Wagon?

[Donas64]

I've heard rumors that someone did a front end conversion of a mazda6 to make it look like an MS6 wagon but have not found pics anywhere. Is it true? I must see this for my own eye.

Yes I've searched but I could not find anything.

 

[wannabe]

it would need to be completly swapped around..not much on the front end is the same..

 

[Donas64]

Thats what I read was done. I was talking about it with some local mazda buddies last week. They saw it online but I can't find it anywhere.

 

[MR_X]

 

[Donas64]

I'm assuming that was done in photoshop right?

 

[MR_X]

Nope, there are a few in the other forum. I was looking for a dark gray that looks pretty sweet. I know of a red one too.

 

[CnoTataymo]

For the swap, I would think you need the hood, both fenders, front bumper and headlights from the looks of it.

 

[MR_X]

No headlights for the swap. Everything else it is needed though.

 

[bova80]

sideskirts too

 

[wannabe]

plus fender liners, fog lights, possibly front rebar, grill, etc.

 

[Boostme]

Stationwagons gust dont have any appeal imo. But of course this is all on your point of view. If you have a stationwagon and you make it look like a speed6 somewhat, then I guess you are alittle better off. But if you have a spped6 and you make it look like a stationwagon then you are just nuts, lol. Thats why Im not really crazy about the looks on the speed3. All IMO of course.

 

[Donas64]

If anyone finds pics of the other MS6 wagon conversions please post them here.

 

[xxxmonoxidechil]

Heres the part numbers for anyone that might need them that wants to do the swap..

Gp9a-50-1t1c Mesh,front Bumper
Gp9a-52-211b Panel(l),fender-frt.
Gp9a-52-111b Panel(r),fender-frt.
Gp7b-56-131b Guard(r),mud
Gp7b-56-141c Guard(l),mud
Gp9a-50-7r0a Grille(r),cowl
Gp9a-50-7s0a Grille(l),cowl
Gpya-52-31xa Bonnet
Gp9a-56-681 Insulator,bonnet
Gp9b-52-410a Hinge(r),bonnet
Gp9b-52-420a Hinge(l),bonnet
Gp9a-56-620a Lock,bonnet
Gj8a-56-627e Protector,lock-bonnet
Gp9a-56-760a Rubber,seal-cowl Panel
Gj6a-53-110d Panel,shroud
Gp9a-52-15ya Stay,lock
Gp9a-56-078 Cover,hole
Fb01-50-133c Nut
Gp9a-50-152b Bracket(r),frt Bumper-lwr
Gp9a-50-162b Bracket(l),frt Bumper-lwr
Gp9a-50-a21c Guide,air
Gp9a-50-070e Reinf.,front Bumper
Gp9a-50-111a Filler,front Bumper
Gp9a-51-9k1d Skirt(c),front Air Dam
Le46-51-680c Lamp(r),f.fog
Le46-51-690c Lamp(l),f.fog
Gp9a-51-684b Bracket(r),f.fog Lamp
Gp9a-51-694b Bracket(l),f.fog Lamp
G22e-51-6h9 Screw Set
G22e-51-695 Screw,front Fog Lamp
Gp9a-51-688 Cord,front Fog Lamp
Gd7a-50-ea1 Fastener
Gj6a-50-e11c Slide\'a\'(r),bumper
Gj6a-50-e12c Slide\'a\'(l),bumper
Ea01-50-037 Rivet
Bc1d-56-145 Clip,mud Guard
Gj6a-50-0z5 Grommet,screw
B455-56-135 Nut Clip
9986-50-516 Screw,tapping
9ya1-10-607 Bolt
C235-51-731a Mascot,front
Gp9a-51-pb1 Mldg(r),fender-frt
Gp9a-51-pc1 Mldg(l),fender-frt
Gj6e-50-715a Fastener
Gj6a-56-750 Rubber,seal-bonnet
Bc1d-58-762 Fastener
Gp9a-56-77xa Wthstp.(r),rad.shroud
Gp9a-56-77ya Wthstp.(l),rad.shroud
J001-56-741 Rivet
Gj6e-51-832a Grommet
9074-00-516b Screw & Washer
9986-50-516 Screw,tapping
Gp7a-51-688a Cord,front Fog Lamp
G18k-51-sj3 Clip
G22c-51-sj3 Clip
Ka80-51-re5a Clip,side Garnish
Gp9a-50-4p1c Guard\'a\'(r),stone
Gp9a-50-4r1c Guard\'a\'(l),stone
B092-51-833 Rivet
Gp9a-50-a11a Cover,towing Hook-bumper
Gp9a-50-031f-aa Bumper, Frt
Gp9a-50-c11c Cover(r), Lamp
Gp9a-50-c21c Cover(l), Lamp
Gp9a-51-9h1a Skirt(r), Front Air Dam
Gp9a-51-9l1 Skirt(l), Front Air Dam
Gp9a-50-711a-88 Grille, Radiator
Gp9a-51-p50f-06 Mould(l), Side Step
Gp9a-51-p40e-06 Mould(r), Side Step


and if you have any questions, here's the thread with the owner of the car. she can answer any questions you might have.

http://www.6crew.com/forum/showthread.php?t=4611&highlight=ms6+wagon

 

[Donas64]

pretty darn cool

 

[m4tic]

now its a toy car!

 

[Killer]

pretty darn cool

Agreed! (iagree)

 

[tunersteve]

Front looks really good, but I don't care for the rear taillights at all. Impressed at the time put into this to make it perfect though. I can't imagine this being a cheap conversion either.

One thing though, it looks good in plain ol' silver!

 

[dutchbuffalo]

I love stationwagons and that one looks pretty darn cool.

 

[wannabe]

$1200? thats pricey...

 

[freekwonder]

I love it. Honestly if I had a wagon I would look at doing this swap with the MS3 drivetrain.