What have you done to your MSP today?

[magnumP5]

My CEL turned off Not even one day after I supposedly fixed the problem too. You gotta love these ECUs...

 

[2.0t03speed]

lol yea i need to go get some plugs for my trunk this weekend since i took the wing off before i wash the car and take pictures.

 

[stdntDrvr]

what other mods do you have?

GOT THE STEEDSPEED ON!!!!



YEEEHAW!!!!!



Seriously, it has more power down low, and it seems like it spools up a good bit faster. It was raining, but it spun tires in 4th, and it's never done that in the rain. It would usually spin 1st, and 2nd, but not 3rd, and 4th.

Now I gotta get the new meth controller set up, and I can do some high boost pulls.

Also, I'll post my impressions after I drive it when it's dry out.

 

[Knox Joe]

what other mods do you have?

About the same as you minus the turbo upgrade, but add methanol.

 

[StealthWyvern]

what other mods do you have?

About the same as you minus the turbo upgrade, but add methanol.

Stock boost?

 

[mgerst1]

my boostsciences rdv was waiting on the doorstep when i came home! i love getting parts

 

[nazgul350r]

installed the turbolife FMIC core.

 

[Knox Joe]

Stock boost?

about 8 psi.

But with the meth I sometimes run 14.

 

[Jaysanooch]

GOT THE STEEDSPEED ON!!!!

YEEEHAW!!!!!

Seriously, it has more power down low, and it seems like it spools up a good bit faster. It was raining, but it spun tires in 4th, and it's never done that in the rain. It would usually spin 1st, and 2nd, but not 3rd, and 4th.

Now I gotta get the new meth controller set up, and I can do some high boost pulls.

Also, I'll post my impressions after I drive it when it's dry out.

Really eh? I've had mine on for months at 7-7.5psi and haven't felt much...but I wasn't expecting anything at that boost level. It just feels healthier sorta and the exhaust note on mine sounds a little different than before.

 

[kamon8404]

Really eh? I've had mine on for months at 7-7.5psi and haven't felt much...but I wasn't expecting anything at that boost level. It just feels healthier sorta and the exhaust note on mine sounds a little different than before.

He might notice more of a difference depending on the shape of his stock exhaust mani. Mine had a crack it in. So I imagine that was causing some issues.

 

[jeg0024]

Hi there, people i need some help here, im trying to install my new EBC and i need RPM signal, from where and how can i get it? any pictures, diagrams etc ?

purple/white wire at either the ECU or the diagnostics box in the eingine bay (right behind the strut tower behind where the battery ground is)

You can see here where I spliced a green wire into it for my tach...

Here is the box, it slides right up off the bracket...

 

[StealthWyvern]

Thanks John.

 

[jeg0024]

Thanks John.

NP

 

[magnumP5]

turbolife IC core is now straight, Corksport Radiator is in with two new SPAL fans Man, it's a tight fit - it has me worried the fans won't fit with an upgraded turbo down the road. I can't wait to get these things to kick on though - it's going to be crazy loud. I've only been able to force them on with the A/C but that's only a slower fan speed. BTW, both fans are wired to the primary fan circuit.

 

[Knox Joe]

He might notice more of a difference depending on the shape of his stock exhaust mani. Mine had a crack it in. So I imagine that was causing some issues.

Bingo!

Mine had one hair line fracture right at one of the joints.


That may be it, but I don't know. That little tiny crack was pretty insignificant.

 

[Mazdaspeed2oo35]

purple/white wire at either the ECU or the diagnostics box in the eingine bay (right behind the strut tower behind where the battery ground is)

You can see here where I spliced a green wire into it for my tach...

Here is the box, it slides right up off the bracket...

Man Thank you very much, You just don't know how much i needed that signal and how hard i looked up over the web to basically find just nothing. Anything you might need i'm here to help Count on it... I'll post pictures of the new toy I' am installing..

 

[jeg0024]

Man Thank you very much, You just don't know how much i needed that signal and how hard i looked up over the web to basically find just nothing. Anything you might need i'm here to help Count on it... I'll post pictures of the new toy I' am installing..

No problem man, glad I could help.

 

[nvmsp]

Even with a more than before cracked thunder manifold, my car still runs hard sometimes with a CEL for something else and all. Normal all the time.

But besides that got the stock hood and grill back on, cars looking stock again. Gotta get 4 tires for the p5 wheels but I'll buy 2 at a time and I need a new coolant overflow tank, mines is leaking.

I gotta go recover from a hangover now, later people.

 

[Mazdaspeed2oo35]

Finally after the help of few good friends in here i found the RPM signal and my new toy is installed and working like a champ.. let me know what you guys think..

Greddy Profec E-01 & Greddy Remote Switch Hi/Lo Boost.

This Unit from Greddy is so damn awesome, I just need to deeply read the instruction to learn all of the features it has.

 

[25FConv]

Finally after the help of few good friends in here i found the RPM signal and my new toy is installed and working like a champ.. let me know what you guys think..

Greddy Profec E-01 & Greddy Remote Switch Hi/Lo Boost.

This Unit from Greddy is so damn awesome, I just need to deeply read the instruction to learn all of the features it has.

looks really good man.