G.i. Cf Peices Direct Market/molder Request
- Thread starter zoomzoom510
- Start date
- Status
Update: Antoine and iSport are in contact regarding the AV status and you (interested members) will be notified if and when iSport has been approved. We appreciate your patience and remind everyone to hold off on deposits for the time being. Thanks!
01ProtegeMP3
Member
- :
- 2001 Protege MP3
so whats the pricing on the cf roof cap?
- :
- mazda protege5
i believe its $600.00 with a 300 deposit when the group buy starts. and turn around time will only be a week or weeks.
currently the av status is not setup as of yet.
UPDATE:
the msp non sunroof mold is finished pics will not be up yet , because he didn't have a chance to put it on roberts car because he had to take a trip to socal for the weekend.
the p5 w/ sunroof will and should be done by this weekend or will be finish this weekend. should be finish first thing next week.
still trying to find a protege w/ sunroof
I want fenders
Ditto...(alright)
plus I wanna vortex generator like the Evos, for a P5 ofc!
Can some one start a poll for part ideas as another aid to gauging interest?
- :
- 2003 Mazda Protege 5
Just saw this post for the first time, like the sound of it. Can't buy anything now, but if a full CF hatch was made in the future, I can guarantee full support for it and purchasing one. I've been interested in things before where I fell through, but the hatch is one thing I'm serious about getting!
~Pat
~Pat
- :
- mazda protege5
hang on tight for now . on the big item,
the rear window roof spoiler is a possiblity. as well as the rest. those all depend on interested parties. not alot of people would want a cf hatch. this things are time consuming and as of right now we are tackling little stuff first.
but hang on tight there seems to be enough market for the hatch maybe he'll only want 5 interested parties. who knows.
but just keep an eye out on this thread . it will not be going anywhere.
- :
- mazda protege5
as of right now, have no clue if the p5 is at all finished he said he will get working on it over this weekend. he was waiting on shipment for the materials. took longer than expected, but sometime this coming week. expect a photo or unless his done and already snapped some pics already , and i have not been updated.
he has a masters thesis confernce to go to sometime this week, so the p5 non sunroof will be on hold for now. and the mold for the msp has been done he just has to test fit it onto the car.
- :
- mazda protege5
Ditto...(alright)
plus I wanna vortex generator like the Evos, for a P5 ofc!
Can some one start a poll for part ideas as another aid to gauging interest?
(strike)alright guys it seems everyone is requesting parts to be made well, this is what i can tell you everything that you guys are thinking of is probably going to get made or be made ( its been thought of ), the only thing that is really holding us back on things are . a) the AV status b) time that he has to work on molding parts. c) the serious/interested buyers parties. (strike)
parts like
CF window door weather sills , CF headlight housing , CF window pillars , etc.. will probably have the most quickest turn around time. reason being it just need to be molded straight from the car.
parts like
CF rear bumper flares , CF rear bumper defuser , CF widebody kit , Cf fenders , Cf hatch , Cf vortex roof defuser , etc.. will probably take longer to mold and make, for the fact that the parts have to be hand made or molded from scratch and will take some time to perfect.
just like i stated b4, this will happened just bare with us and have faith in bryan and me and the volunteers. (2thumbs) .
yea, I just got back home after going to socal...once he fabs the first cf roof for mine I'll bring it by for him to test fit on the car, if it fits then we shall take some pictures of it to post up
should be next weekend for the p5 w/ sunroof to be done and possibly for the msp to be done, depending on how much he can work on it this week
once the molds are made I'm fairly confident he can get these out much quicker because he can work on multiple at the same time (since it takes time for each layer of resin to harden), so bear with us until after he gets av status and gets the molds made
should be next weekend for the p5 w/ sunroof to be done and possibly for the msp to be done, depending on how much he can work on it this week
once the molds are made I'm fairly confident he can get these out much quicker because he can work on multiple at the same time (since it takes time for each layer of resin to harden), so bear with us until after he gets av status and gets the molds made
- :
- mazda protege5
perhaps i missed this, but how are these parts going to be coated? I mean will this guy be using PPG clearcoat and whatever else needs to be used to prevent these parts from fading? I'm down for some nice carbon fiber stuff, but I bought stuff from DGM (interior peices) and they were faded in like a month...on the flip side I have a hood that Joe (CrazyCaker) did that is a couple years old, stayed on during the winter, and still shows no signs of fading.
- :
- mazda protege5
i believe he will be clearcoating them . but then thats not my call nor is it my say. lol . Bryan?
look back a few pages I explain all the things I do to prevent fading.
I didn't get on my computer the last 2 days, an update will be coming later tonight.
- :
- mazda protege5
what the update and progress on the p5, and the details on the mold for the msp , are you gonna be testfitting it onto roberts car? or just gonna lay it without his car there? , and what about the pictures ?
thanks in advance.
- Status
