What have you done to your MSP today?

[Matrix]

I just ordered a Weapon-R Engine Damper for my MSP. Hopefully this will cure my wheel hop once and for all, as well as the vibrations that came from the stiffer motor mount inserts I installed at all four points.

 

[Mazdaspeed2oo35]

I just ordered a Weapon-R Engine Damper for my MSP. Hopefully this will cure my wheel hop once and for all, as well as the vibrations that came from the stiffer motor mount inserts I installed at all four points.

Like i said in the PM, at least is working on me, the engine damper have done alot to the vibration and holding the engine as well

 

[magnumP5]

Mazdaspeed2oo35, that is a badass idea! I really need to look into doing something like that but maybe a bit more discreet. I can never find someone to help me out while tuning... vbmenu_register("postmenu_3970061", true);

 

[Mazdaspeed2oo35]

Mazdaspeed2oo35, that is a badass idea! I really need to look into doing something like that but maybe a bit more discreet. I can never find someone to help me out while tuning... vbmenu_register("postmenu_3970061", true);

Thanx man, i really try to have everything needed and clean as possible, as you can see is a very common Mount , and easy to install and remove. i was tired of seeing people at the dynos with the laptops in the passenger side seat all ****** up or in their legs, at least with the mount in there you can concentrate better in the tuning than holding the laptop. also is good if you need or do the tuning yourself in the streets, you dont have to be watching all the time the laptop bouncing and flying all over. plus i think looks very cool and professional and very useful. i mean i dont spect everyone to like what i do but i think like you just said is a good idea to have one that you can remove in a sec..

 

[Mazdaspeed2oo35]

Goodnight Fellas, already 4:00 am here in Spain.. time to rest !!!!

 

[CitizenPro]

Bored today, so i snapped a crappy pic...

 

[sandspeed]

Changed the direction im taking my car turbo wise. Will now be using a hi boost mani,downpipe,and a FP(forced performance) GT3076HTA turbo should be fun lol

Dang ryan thats an expensive ass turbo, but its awesome. I know someone down here that has one on his WRX and it hauls ass.

I think my SC61 is going to destroy my tranny...yay

Charles I want to rock the advans, I <3 them

 

[kamon8404]

Bought a new kenwood deck and wideband. Can't wait to get the forcefed gauge pod to mount the WB. Contemplating ordering the dual gauge pod SU sells! In less anyone knows where I can get it cheaper.

 

[Mazdaspeed2oo35]

Bored today, so i snapped a crappy pic...

Nice Rims Citizen, they only need the center caps, but oh boy you are rolling on K-Sports....

 

[2.0t03speed]

Dang ryan thats an expensive ass turbo, but its awesome. I know someone down here that has one on his WRX and it hauls ass.

I think my SC61 is going to destroy my tranny...yay

Charles I want to rock the advans, I <3 them

yea if you ever get your manifold lol

 

[livelyjay]

Finally Today i did my Car Laptop Mount, now i can drive around save and tune my Haltech without my laptop flying and bouncing around. it was an easy install, and in seconds you remove it and install it.. let me know what you guys think..

Nice setup. Be very careful with that laptop. I used to own one, so did my friend. DC jack failed on both, and it's a very common occurrence with those models.

 

[sandspeed]

yea if you ever get your manifold lol

soooo true! I was promised an update yesterday from Brach but didn't get one.

Oh, I noticed that you opted for the AGP 50 trim, excelled choice my friend. Just about every SRT4 in Miami has a 50 trim and they are all very fast cars. The .48 turbine housing will have great spool and pull hard. And you have twiggy cams so your powerband should be really long.

 

[2.0t03speed]

lol power should hit at 4k if everything that ive read on the twiggys is correct the 50 trim with the .48 back half should be fully spooled a couple hundred rpms before that so she should take off like a rocket. One other plus about it CHEAP REBUILD KITS!!!

 

[Mazdaspeed2oo35]

lol power should hit at 4k if everything that ive read on the twiggys is correct the 50 trim with the .48 back half should be fully spooled a couple hundred rpms before that so she should take off like a rocket. One other plus about it CHEAP REBUILD KITS!!!

Hahahaha. Little Biach,, you love the lowend dont you, changing your mind about the turbo you want to run....lol J/K that turbo sounds like a serious bad boy. hope everything comes out the way we have talked...

 

[laracroft]

Hahaha, You should try the ACT Xtreme Pressure Plate and keep the Street Performance Disk, youll be more in love with it.. the heavy duty pressure plates from ACT are good but holds less power than using the same Clutch disk but with the Xtreme Pressure plate. Weird that Manuel didnt recommended you the Xtreme Pressure plate and Street Performance Disk from the beginning..

anyways, have you gotten your car back from TBK yet ? how does the Quaife LSD feels ?

Getting it back next weekend. I'd probably get it back sooner, but he's a few hours from where I live. So I have to go on a weekend.

 

[Mazdaspeed2oo35]

Nice setup. Be very careful with that laptop. I used to own one, so did my friend. DC jack failed on both, and it's a very common occurrence with those models.

Hahaha,, thanks for the advice, its going to be 5 years or so with it, no problems. i have changed the CPU for a faster one, upgraded the Memory from 256 to 2 GB Ram, added a bigger Harddrive, and also added better internal Wi-Fi Card , as well as a better and longer lasting battery and a remote control....

BTW is a HP Pavilion ZV6000

 

[2.0t03speed]

dude lowend is where its at for fun around town

 

[Mazdaspeed2oo35]

Getting it back next weekend. I'd probably get it back sooner, but he's a few hours from where I live. So I have to go on a weekend.

ah OK, sounds good Lara, why dont you try what I'm telling you, Xtreme Pressure plate with the same clutch you have.. and if you need a stronger setup you can always use the Xtreme Pressure Plate along with the 6 Puck Sprung Racing Clutch Disk G6, those two things together holds 432 lbs of torque, and feels just like what you have now. anyways ACT Clutches and Pressure Plates holds more power than what they say they do.. Ive learn that From What Manuel Did to my car, Straight up he recommended me what i have just told you, and i got rid off my Spec Clutch i had before, which i think is a Poss next to ACT.

btw what turbo do you have, and Psi you are running ? can you post some engine bay pictures and overall pictures of your car.., i still remember when you took 2nd place at 2006 Mazda Summer Palooza.... we all had a great time...

 

[Mazdaspeed2oo35]

dude lowend is where its at for fun around town

Hahahaha,,, you and your damn Lowend... get a damn Airplane here to where i live, and stay for a week, ill show you what lowend and top end is all about Biach........ lol lol lol.......you freaking promised me you were going to come here to chill.. hahaha you know youll have everything to have fun, place to stay, food and you know what to have fun around !!!!


Hahahaha,,, youll be like these all around: (fu) and then: (drive2)

 

[StealthWyvern]

Nice setup. Be very careful with that laptop. I used to own one, so did my friend. DC jack failed on both, and it's a very common occurrence with those models.

I work on computers all the time on the side and the two most common laptop issues that I see are the DC jacks going out and the powercord getting shorts. Seriously they are websides tha only sell dc jacks and laptop power cords!