What have you done to your MSP today?

[terbow]

had to go to a muffler shop to get that freakin' bolt out so i can get my wideband sensor in..

the bolt was practically fused with the exaust.. i never seen such a stuborn bolt..

now we can get down to business

i hear u on stubborn bolts! things were gravy in 04 when i get her, now shes a stubborn b****.

what wideband u get?

 

[SwirlFX]

I dyno'd today for the first time. Only power mods are Injen CAI and Vibrant Turboback. 159.8 HP 170 TQ.

 

[fr0st]

i hear u on stubborn bolts! things were gravy in 04 when i get her, now shes a stubborn b****.

what wideband u get?

bought the AEM UEGO gauge. looks nice but doesn't quite fit well beside my autometer boost gauge.. the silver ring thing around it is ALOT thicker so under my head unit gauge bezel it slooks somewhat weird..maybe i'll get used to it.

 

[fr0st]

I dyno'd today for the first time. Only power mods are Injen CAI and Vibrant Turboback. 159.8 HP 170 TQ.

can't wait to get mine on a dyno...

i hope to get atleast 190 - 200 whp.

 

[terbow]

bought the AEM UEGO gauge. looks nice but doesn't quite fit well beside my autometer boost gauge.. the silver ring thing around it is ALOT thicker so under my head unit gauge bezel it slooks somewhat weird..maybe i'll get used to it.

you wont. lol. i didnt, it dwarfed all my other gauges so i got somehting else. Nice gauge though

 

[terbow]

can't wait to get mine on a dyno...

i hope to get atleast 190 - 200 whp.

Im goin this spring, cnat wait either.

 

[laracroft]

I didn't do JACK with my car today except drive it. I'm a loser. I need to clean it, it's dirty as hell. I should be ashamed but I'm too tired to be. lol

 

[Pirana]

I installed the factory exhaust back in the car

 

[dave45090]

I didn't do JACK with my car today except drive it. I'm a loser. I need to clean it, it's dirty as hell. I should be ashamed but I'm too tired to be. lol

Damn.....welcome back.

 

[laracroft]

I know, blast from the past right? lol Been a while and I've been through alot since I last logged in. I'll do a thread on it one of these days when I have time.

 

[SeR_Cyclops]

I installed the factory exhaust back in the car

man pirana i thought you were leaving the vibrant on? lol

sickest msp -> average joe.(sad2)

 

[fr0st]

I didn't do JACK with my car today except drive it. I'm a loser. I need to clean it, it's dirty as hell. I should be ashamed but I'm too tired to be. lol

a 283whp, 296 ft lbs tq car doesn't need to be clean. (wink)

 

[Pirana]

^hehehe you are right!!! Nice to hear from you again!!

I took it put since Iam selling the car.

 

[terbow]

I have Finished relocating the pump! pictures of install and scarred hands to follow

teaser pic for j00.

 

[_Sloteg_]

Went out and took some new pic's....


http://www.mazdas247.com/forum/showthread.php?t=123692817

 

[terbow]

Is radiator stop leak bad for the car?

I have this huge leak and i cant seem to find where it is, but its seeping out from under the rad. so i assume its the rad but i didnt want to buy a new one if thats not the issue. so i was going to fire some rad leak fixer in there to see if it stops then get a new one.

unless hte stuff is really bad for the car, never used it.

 

[_Sloteg_]

Is radiator stop leak bad for the car?

I have this huge leak and i cant seem to find where it is, but its seeping out from under the rad. so i assume its the rad but i didnt want to buy a new one if thats not the issue. so i was going to fire some rad leak fixer in there to see if it stops then get a new one.

unless hte stuff is really bad for the car, never used it.

I don't know if it's bad for the car but,being that the turbo is oil/water cooled I wouldn't put it in there.

I had the same problem before. I took my rad out and took it down to a local rad shop to have it pressure tested and,everything was fine with it.Turn's out my lower rad hose was put back on at a slight angle causing it to leak a bit.

 

[laracroft]

Have you put the car on jacks and looked underneath? Before I'd use that stuff, I'd check my radiator with a fine tooth comb first! Especially the hoses. And is it a slow leak or does it leave a big puddle? And lastly, do you have an after market catch can?

 

[terbow]

yea im going to take it out tonight and look it over. i thought the rad leak stuff u empty the rad and shake it around, i didnt know it goes all the way through the engine. screw that !

figures.. finish one project and bam something else breaks.

if its the rad ill be forced to get the corksport rad. damn

 

[laracroft]

I bought a CSF JDM Radiator from Manny at TBK Performance in Miami. It was pretty reasonable. Ask him where he got it. It's definitely cheaper than the corksport.