What have you done to your MSP today?

[Maxxpwr]

I pay under 1200 a year.....

Second Driver
4 Door protege
Under a Canadian Bank that my Mom works for

(dance)

your amazing ^ haha. I pay 150 a month for my evo. mine's second driver too.
-today I blacked out the rear msp badges. looked okay, It will look better once we get the wing black. which we attempted today and it looked awesome but we decided it needed to be paint. (we tried vynal)

 

[Gasological]

so its 55 here. and i decided to take a drive. The tires were semi warm. wheels spun in all gears cept 5th. heh. all my tq is up front now. Once they warmed up it stuck in 4th. shes runnin so damn good. im going to dyno it soon i have to see what im at.

i let ken from PG drive it a week ago, he said its drives like an NA car. I take it my work has paid off.

What do you have in her now? Low end tq is most of what I drive.

 

[terbow]

perf mods:

corksport front and rear inserts
awr sidemount inserts
corksport turboback w/ msp axelback
liquid to air intercooler (this is where most of my tq comes from since the piping run is so damn short)
11psi
SSAFC supermap (working on tuning it this week)
Custom Aluminum hardpipes and SRI
thunder manifold

 

[livelyjay]

I pay around $850 a year for full coverage, and I have two tickets on my record.

Oh, and I now have three claims on my record too. None of which were my fault.

 

[evilmonkeyMSP]

today I parked it on our freshly recoated garage floor, so purty.....

http://i25.photobucket.com/albums/c7...p/PA070021.jpg
http://i25.photobucket.com/albums/c7...p/PA060017.jpg
http://i25.photobucket.com/albums/c7...p/PA060019.jpg

 

[livelyjay]

How much did that run, because I want it?

 

[evilmonkeyMSP]

free! My dad works for a local paint company and his boss wanted to try out their new product so my garage has been the test mule for a couple things and then this final coating. It was completely pressure washed, etched and primered before this went on so it should last forever.

 

[fatti03msp]

wish i had a garage lol. Need to get me one of those.

 

[livelyjay]

free! My dad works for a local paint company and his boss wanted to try out their new product so my garage has been the test mule for a couple things and then this final coating. It was completely pressure washed, etched and primered before this went on so it should last forever.

That's just not fair at all.

 

[evilmonkeyMSP]

hehe

 

[evilmonkeyMSP]

be sure to add your name if you want http://www.mazdas247.com/forum/showthread.php?t=123685417

 

[31R]

You can coat your garage floor yourself:

http://www.ucoatit.com/main.htm

I plan on doing this in the near future. Looks fairly simple.

 

[evilmonkeyMSP]

I HIGH suggest you get one of the kits that comes w/ paint chips to throw down before the final epozy clearcoat as it gives the floor a texture and grip much like asphalt

http://i25.photobucket.com/albums/c76/evilmonkeymsp/PA060019.jpg

Before doing the final treatment they tested their basecoat versus the same thing from home depot and the home depot stuff just peeled off and stuck to my hot tires.... bad.

You can coat your garage floor yourself:

http://www.ucoatit.com/main.htm

I plan on doing this in the near future. Looks fairly simple.

 

[evilmonkeyMSP]

based on the link you posted the kit you would want would be the UFLEK-AF

UFlek-AF kits include the tools and instruction for applying UFlek-AF, one 3 lb. container of UFlek vinyl chips, and the UGloss-AF clear coat. Kits will terrazzo up to a 2 car garage.
Single pack includes extra clear coat only, double packs include clear coat and a container of UFlek flakes. Extra flakes may be ordered for heavier application.

 

[Wbriggs19061]

yea so i was driving to work this morning just like always..raining for the past 2 days may i add. yesterday i felt the rear get a little loose. well today i went even slower around the turn at about 25mph when there were 3 deer on the other side (its like a 145deg. turn in the woods) so i braked like i always would. and the back end went sideways so as i straighten out the wheel i catch traction and down the ditch i go..luckily there was a mud hole that stopped me before the woods did..no damage that i can tell but its covered in mud.

 

[terbow]

glad ur ok. wicked just got in a deercident too.

 

[livelyjay]

based on the link you posted the kit you would want would be the UFLEK-AF

And that is an add-on to the UCoat product, so you're looking at $500 for everything and probably a lot for shipping. I will be doing this, but only after I get my garage built the way I want it. Cabinets, work bench, decent overhead lights, etc.

 

[evilmonkeyMSP]

not to mention the cleaning products too.... but yeah, it aint cheap

And that is an add-on to the UCoat product, so you're looking at $500 for everything and probably a lot for shipping. I will be doing this, but only after I get my garage built the way I want it. Cabinets, work bench, decent overhead lights, etc.

 

[baconbitz]

Well my afc should be here by now but its not. School mail is slow as s***. It went out for delivery at 6:45a.m. and still hasn't gotten here. The freight place is like 4 miles from here. wtf.

 

[CnoTataymo]

Went down to 9psi because at 10 on pretty cold mornings was getting fuel cut.