What have you done to your P5 today?

[bazooka joe]

I have the second set of brushed that daveB did.. my center one fell off a LONG time ago, fixed it with a small dab of super glue.. never a problem since.

don't drive so fast and they stay on!!!

 

[iLisa]

don't drive so fast and they stay on!!!

(drive2)with a dab of glue they stay on also.. and then you can still drive fast.

 

[Salmon_Rob]

my car is to slow to make a ring fall out

 

[bazooka joe]

(drive2)with a dab of glue they stay on also.. and then you can still drive fast.

i just reinstalled some rings and they seem to snap on....? if i have to i could always glue mine as well....

 

[Demoniam]

I used a spot of clear silicone, so that I can remove them.......hahaha...like i ever would!

 

[Elite 1]

Audio: Poineer mp9300 cd player, pioneer 6X8 in front doors, jl audio 6 inch coax in the rear doors and dynomat.

 

[amsgator]

Good News: Everything is back on my car that I took off

Bad News: Lights aren't painted b/c i couldnt get the plastic off even after heating 3 times in oven. i got it pryed a lil but wouldnt come off and i have somewhere to be at 630 so i had to put everything back on. hopefully i can try again next week.

Other good news: so i didnt completely waste my day, i moved my ballasts so they arent in the engine bay anymore. also all the nuts and screws are gone, so everything i took off found it's way back on.

 

[THE Phen]

my car is to slow to make a ring fall out

No...it's 22v. It's the fastest color!

 

[D-rock240]

Not as fast as 24e

 

[phazed_mp5]

been a while, but thanks to blackprotege5, got my headlights blacked out and injen cai installed. thanks to my lil mama, got jdm tails on the way from corksport. happy birthday to me!

 

[bucksatan]

I just got an e-mail from my mom saying that someone was turning around in her driveway and clipped the corner of my car, leaving some scratches on the rear bumper. The best part is that I am out of the country for another couple of weeks, and she was away for a couple of weeks. So it could have happened at any time. No note or anything. Stupid people.

Now I get to spend the next couple of weeks worrying about how bad it is. Hopefully it is just some minor scratches that I can get taken care of.

Aaaaaaaarrrrrrrrgggggggggggghhhhhhhhhhhhhhh.

 

[THE Phen]

Not as fast as 24e

Added gold flake makes it heavier. Not as fast.

 

[D-rock240]

LOL, just ask Rob who was pulling on who in 4th gear on the way back from Frederick....

 

[Salmon_Rob]

we have both won one. me from dig, you from roll

 

[CTt3P5]

Good News: Everything is back on my car that I took off

Bad News: Lights aren't painted b/c i couldnt get the plastic off even after heating 3 times in oven. i got it pryed a lil but wouldnt come off and i have somewhere to be at 630 so i had to put everything back on. hopefully i can try again next week.

Other good news: so i didnt completely waste my day, i moved my ballasts so they arent in the engine bay anymore. also all the nuts and screws are gone, so everything i took off found it's way back on.

That is always a good thing. Just think, the next time you remove the bumper, it will be much faster!

 

[D-rock240]

we have both won one. me from dig, you from roll

Are you talking about the runs down on route 3? I was talking about Tuesday night coming back on 70. We started from ~40-60 mph.

 

[amsgator]

That is always a good thing. Just think, the next time you remove the bumper, it will be much faster!

yea. those two nuts behind the fender are a PITA to get to

 

[CTt3P5]

yea. those two nuts behind the fender are a PITA to get to

(iagree)

 

[amsgator]

does anyone happen to know how to determine the positive wire to the parking lights? looking over the catz kit and i have to connect it to the postive parking light wire.

 

[rednecks_r_us]

does anyone happen to know how to determine the positive wire to the parking lights? looking over the catz kit and i have to connect it to the postive parking light wire.

Get a $0.99 wire tester. It'll have an aligator clip on one end of a wire the a light and a metal probe.

Attach the clip to a grounding spot on the car and stick the other end into the parking light wire loom. Turn on the parking lights and test each wire until you find the one that iluminates the light in the wire testor. Then turn off the parking lights and test that wire again. If it now doesn't light up the tester then that is your wire.