Hi all!
I'm Vagelis from Greece and I have a white 2 1.5.
The car is a 5d crystal white pearl edition with SAP.
After 17.500km driven, some of them in the track, I have to admit that its a very sporty car with great handling,sharp steering and powerfull enough to compete against all the other cars with similar specs such as yaris ts and ignis sport.
My mods are:
Ultralite G-Spec wheels 16x7,5 et40(wheight 6,8kgr each)
J's Racing Lug nuts M12x1,5
Window tint Lumar Titanium
MSD Dashhawk
Full custom exhaust
BMC DIA(70-130) induction kit custom fitted
The exhaust setup is 4-2-1 header(38mm-42mm-48mm) with an HJS 200cpi catalyst, 48mm free flow mid box and stock 45mm backbox in order to achieve backpressure until an ecu remap will be done.
In order to install the bmc kit, I moved the water tank about 2cm higher
The induction kit without the last hose that sucks air from the front of the car
The kit installed.You can see the hose that sucks air from the fron of the car.Down-left.
For the MAF,a 59mm inner diameter tube is used,the same as the toyota mr2 1.8 vvti.
After these mods i dynoed the car and it achieved 115,8hp and 139nm of torque.The numbers would be better if the ecu could readjust more.With an ecu remapping things will be much better and I'm hopping to achieve more than 125hp.But we will see about that.
Some photos of the car inside:
http://img17.imageshack.us/img17/6381/dsc00897s.jpg
Top speed achieved with the mods:
And 0-100km according to dashhawk is 8,35sec.This is the diagramm
http://www.imageshack.gr/files/8815jat6we15ntqgmira.jpg
Some pics of the car:
I'm Vagelis from Greece and I have a white 2 1.5.
The car is a 5d crystal white pearl edition with SAP.
After 17.500km driven, some of them in the track, I have to admit that its a very sporty car with great handling,sharp steering and powerfull enough to compete against all the other cars with similar specs such as yaris ts and ignis sport.
My mods are:
Ultralite G-Spec wheels 16x7,5 et40(wheight 6,8kgr each)
J's Racing Lug nuts M12x1,5
Window tint Lumar Titanium
MSD Dashhawk
Full custom exhaust
BMC DIA(70-130) induction kit custom fitted
The exhaust setup is 4-2-1 header(38mm-42mm-48mm) with an HJS 200cpi catalyst, 48mm free flow mid box and stock 45mm backbox in order to achieve backpressure until an ecu remap will be done.
In order to install the bmc kit, I moved the water tank about 2cm higher
The induction kit without the last hose that sucks air from the front of the car
The kit installed.You can see the hose that sucks air from the fron of the car.Down-left.
For the MAF,a 59mm inner diameter tube is used,the same as the toyota mr2 1.8 vvti.
After these mods i dynoed the car and it achieved 115,8hp and 139nm of torque.The numbers would be better if the ecu could readjust more.With an ecu remapping things will be much better and I'm hopping to achieve more than 125hp.But we will see about that.
Some photos of the car inside:
http://img17.imageshack.us/img17/6381/dsc00897s.jpg
Top speed achieved with the mods:
And 0-100km according to dashhawk is 8,35sec.This is the diagramm
http://www.imageshack.gr/files/8815jat6we15ntqgmira.jpg
Some pics of the car:
Last edited: