WTB: MSP Turbo Oil Feed Line

[vodapas77]

Ok,

Doubt I'll have much luck, but I'll give it a try. I really need to buy the MSP factory oil feed line for the turbo. I doubt there are too many of these sitting around, but I figure maybe someone who put a larger turbo on a MSP that didn't share the same housing as the T25 (like a T3/T4) might have changed out the oil feed line.

Basically what happened is when I was pulling off my MAM mani. to put my car back to stock the bolt that secures the oil feed line to the housing just turned to butter when I was trying to remove it. It didn't matter what I used the thing just kept getting rounder and rounder. Finally, with a pair of vise-grips I got it off. But, you can imagine how it looks now.

So, if by some chance you have one lying around collecting dust I'll be happy to take it off your hands.

Thanks,

Lang

 

[vodapas77]

Bumpers...

 

[blackp5ca]

I would think you could get a steel braided feed line made at any hydraulic hose shop for under $40. I had my feed and return lines made for a T-3 and it ran me just over $90 (cdn)..gotta be something for you local?

 

[vodapas77]

I would think you could get a steel braided feed line made at any hydraulic hose shop for under $40. I had my feed and return lines made for a T-3 and it ran me just over $90 (cdn)..gotta be something for you local?

Yeah, that's proabably gonna be what I have to do, but I figured I'd try on here first.