Wiring Details For Remote Start

[acidbug]

Hey all...I just picked up a remote start for my car...it's an add on...for my current viper alarm system!

Does anyone have the diagram...w/ color codes vs. what each wire does...

Thanks

Chas

 

[1sty]

Its amazing what you might find in the right forum

http://www.msprotege.com/vbb225/showthread.php?s=&threadid=9965

 

[acidbug]

Thanks allot for your help...your thread had allot of good info in it...do u know how to make a switch so that if you are in gear the car won't start??

Thanks once again..

chas

P.S. you should ask the moderators in here to make that thread into a sticky in the HOW TO Section!!

Chas

 

[1sty]

Not a bad idea on the how to, unfortunitly I don't have the time for a proper write as I would like to do it with pictures and all.

Go down a little further in the tread and another memeber attached a relay setup that he used for the nuetral safety trigger.

The weird thing is I though all DEI products had a Black/White wire that was purely for a nuetral safety trigger. But most people ground it out when not using it.

 

[sttl013]

Do a search for "neutral trigger", and go to the thread that was started by ELEmental. All the relevant info, a wiring diagram, and safety switch info is there.