Turbo Install

[NC_MP3]

Got some pics from last night. I started putting my kit on. Sorry for the bad pics, I will break down and buy a real digi camera one day.

Having a little fun with a loud ass civic, 1.5 JDM engine, highly modded, no LSD though hehe.

I got everything bolted up and the intercooler mounted. Only things left to do are tap the oil pan and run my oil lines, install FMU, few more odds and ends.

 

[NC_MP3]

Oh, that yellow CRX up there runs 12's all motor. B20 VTEC engine.

 

[YP5 Toronto]

good luck...have fun...keep us posted

 

[LinuxRacr]

Welcome to the world of BOOST!! (laugh)

 

[Kooldino]

Hey NC, can you do me a favor and take a pic of your AC condensor and place it in this thread for me?
http://www.mazdamp3.com/vbb225/showthread.php?s=&threadid=15563

 

[spoolinmp3]

NC's condensor had to be relocated.
From what I heard he had a mission doing so since we did not send him the install instructions for the intercooler(hand)
Sorry Jim

 

[NC_MP3]

Yeah, I pulled the front end off and was like, what the hell? I got the stage 3 instructions now though, it all makes sense.

I should have it runnning this weekend. I am waiting on the steel oil pan bung (damn Mazda, mismatching their oil pans hehe). I hope to have it running as there is a dyno day this weekend, 4 pulls for $50, so I will do a little dyno tuning and have some numbers.

I can't wait to get it all together, the Tial wastegate is gonna look badass. I will also be running my dump tube out in front of my front wheel once I get my WW kit, thats gonna look hot.

Thanks Terry for the quick responses to my questions, keep working on stage 4 bro!

 

[NC_MP3]

Oh yeah, we went to the strip Sunday. That yellow CRX up there laid down a 12.7, all motor. I have a CRX that me and a buddy are building up, ran a 13.4 in it, all motor, B16 swap, LS tranny.

I am gonna go for some forged pistons and rods next, with the stage 4, hope to get to 15-18 psi in about 3 months. I will be the guinea pig and see how well the tranny holds.

I found a few places where I can get complete tranny's for $500, and engines for $800. I will try to push the limits and if things blow it won't cost too much to replace.

 

[PaulMP3]

[BI am gonna go for some forged pistons and rods next, with the stage 4, hope to get to 15-18 psi in about 3 months. I will be the guinea pig and see how well the tranny holds. /B]

Good luck, your gonna have one bad ass MP3.