replacement t25... i need a few Q's answered Plz

[Dr0]

i talked with cr3 and he pretty much pointed out that this turbo will work if i swap out my compressor housing... now before i go off and blow more money, where can i get some oil/coolant lines to work with this?

And if this wont work LMK, but in my eyes its pretty cut and dry swap and makes sense idk why it wouldnt work.

EDIT:
http://www.enjukuracing.com/products/*ISIS-T25{47}T28-Replacement-Turbo-%2d-Nissan-SR20DET.html
This is the link to the replacement turbo

 

[mazdaspeedp]

Looks like a headache cuz the nissan turbo is different from a msp turbo. U need to make sure its a gt25R and it has to be a t25 flange.

 

[yudkib]

man it has been a long time since i dealt with this s*** but i think hes right. if you swap housings you should be fine.

problem is the MSP housings are a notorious pain in the ass, and from what i recall, if you break the snap ring, you're totally ******.

also not sure if MSP is on -3AN or -4AN, but you'll have to drill a restrictor, and i'd bet seal off your coolant lines. hardly seems worth it to save $200. get a new CHRA theyre out there for GT2554RS these days for like $400-450