Ordered a 55 watt hid kit and went to install it tonight and realized the bulbs don't match up to the factory ones. Is there a certain type of bulb you have to get if you want the 55 watt kit?? Searched and didn't find any how to on it so I'm posting this up. Thanks for any help.
ms6 and 55 watt hid kit
- Thread starter mrkdspd
- Start date
amilliems6
Member
- :
- MazdaSpeed6
why did u go for 55w?
for ur fogs or what?
for ur fogs or what?
No for my low beams. Just wasn't happy with the output of the stock setup.
amilliems6
Member
- :
- MazdaSpeed6
i believer the output sucks cuz our projectors are bad
amilliems6
Member
- :
- MazdaSpeed6
yea its fine but could be better
amilliems6
Member
- :
- MazdaSpeed6
we have HID low beams?
in my opinion, getting 55w for headlights is just dumb. No offense, but ur gunna blind people. If you want more output just get different hid temp like 5k and get a 35w fog or even 55w fog for more light output.
ambientFLIER
Member
The stock output on my '04 was absolutely horrible. I could barely see anything at night. I got a 35w kit now, and it looks OEM.
However, 55w? That's pushing it, especially if you're going to use the stock projectors. And who the hell would recommend putting that in the fogs? You guys are nuts. Fogs aren't made to be spotlights over a mile distance.
However, 55w? That's pushing it, especially if you're going to use the stock projectors. And who the hell would recommend putting that in the fogs? You guys are nuts. Fogs aren't made to be spotlights over a mile distance.
- :
- 2011 Mustang GT
If you're going to run a 55w kit, you're gonna need to run a wire to the battery to power it up. The OEM low beams are a 35w kit.
If you're looking for better light output, work on the fog lights first. Those seem to yield the biggest gains. Also, make sure your headlight lenses aren't hazy, since that cuts down on light output as well.
And, not to contradict anyone before me, but higher color temp (in Kelvin (K)) is inversely related to useable light (lumens). A 14000K bulb puts out much less light than the OEM 4300K bulbs.
Personally, I don't recommend going above 6000K for your low beams. Fogs, I would stay between 3000K and 8000K. High beams are fair game (if you want to spend the money on HID replacements.
If you're looking for better light output, work on the fog lights first. Those seem to yield the biggest gains. Also, make sure your headlight lenses aren't hazy, since that cuts down on light output as well.
And, not to contradict anyone before me, but higher color temp (in Kelvin (K)) is inversely related to useable light (lumens). A 14000K bulb puts out much less light than the OEM 4300K bulbs.
Personally, I don't recommend going above 6000K for your low beams. Fogs, I would stay between 3000K and 8000K. High beams are fair game (if you want to spend the money on HID replacements.
block8head
Member
- :
- 06 MS6 black mica GT
Need a better projector for sure....
here is my RDX projector
Stock HID are well known FTL ,Retrofit FTW
here is my RDX projector
Stock HID are well known FTL ,Retrofit FTW
amilliems6
Member
- :
- MazdaSpeed6
Need a better projector for sure....
here is my RDX projector
Stock HID are well known FTL ,Retrofit FTW
where did you get the new projectors? and are those 10k?
block8head
Member
- :
- 06 MS6 black mica GT
No sir those are stock 4300k it just colorful from the projector....
if you ever drive in front of the acura RDX at night then you will seeit just like the pics here....
The projectors is from Ebay.....
ambientFLIER
Member
Stock low beams are 55w halogens.
- :
- 2011 Mustang GT
Non-HID models are 55w. MS6 had 35w HIDs stock.
amilliems6
Member
- :
- MazdaSpeed6
block8head
Member
- :
- 06 MS6 black mica GT
MS6 doesn't come with halogens.. unless you have a fake one..
look for RDX projector headlights...
New Threads and Articles
-
-
Why use the Official Mazdas247 App and How to install it- By Antoine
- Replies: 0
-