Motor Mounts for 1.6L

[red95_240sx]

Are there any aftermarket motor mounts for hte 1.6L engine. if you know, include a link.

 

[AzteCypher]

Are there any aftermarket motor mounts for hte 1.6L engine. if you know, include a link.

You can use the inserts that are designed for the 1.8L/2.0L.

http://www.awrracing.com/store/index.php?cPath=2_22_58

 

[ncsukingpin]

Bump ... The AWR site claims that the competition does not use insterts, but that that their bushings are bad and thereofre AWR is better even though it has to use inserts. Any opinions?

 

[AzteCypher]

I'm not sure about AWR but I found the site that sells my inserts and they appear to be going for $55 shipped!

http://www.rr-racing.com/engine-mounts.htm

 

[steve_protege]

I have a set of mounts from AWR. They are 70 durometer I believe?

 

[zerocover]

Front rear and trans mount are the same as the 2.0.
I know I have them.

The Passenger mount is different. You can get a solid mount from advance auto though. (I have it)

 

[Joost27]

Im running the AWR Front Motor mount 90 duro, and couldnt be happier, the AWR Rear mount is on the way, I shall update my "Recent Stuff" thread when that comes in. Also, a friend of mine jsut bought the complete set for his 2.0L im gonna help with that and look at it and see if any of the sides will pssibly fit mine, if they do im buying them!...But for front and rear AWR is my choice, i guess SLS makes a very nice Front Mount also.

 

[red95_240sx]

yeah ive found the front and rear mounts can be used. im going with SU.

 

[mazpro]

I didn't know the rear fit! I am going to look into getting it. I have the AWR front one and it's been great so far, helped a lot with the engine rocking.

 

[red95_240sx]

just abit harder to install...

 

[mazpro]

so you have to make it fit, huh?

 

[AzteCypher]

Not really make it fit but it was a pain in the ass to get in theree. I've installed rears on both LX and Mazdaspeed and they're both just as hard. We ended up dropping the mid-pipe on both cars just to get better access to the bolts.

 

[mazpro]

so we are centain that we can use the rear inserts from the 2.0? because the ones from http://www.rr-racing.com/engine-mounts.htm seem pretty good for 33 bucks...

 

[AzteCypher]

As long as you don't have an auto tranny, you're good to go.

 

[red95_240sx]

auto tranny for the rear?

 

[AzteCypher]

Yup, it's what is says on the site. I believe because the tranny might be shaped differently so the mount might be different. But don't quote me on that.

 

[red95_240sx]

i only plan to replace the front. i would use inserts on the rear sometime later.

 

[AzteCypher]

You should be good with the front then. Nice ride by the way. What do you have for a drop. Looks almost as low as my Ksport.

 

[red95_240sx]

i have toucan/evotion coils. you must be going by the picture in my avatar. its comparable to tein, but i still plan to buy a set of tein.

 

[AzteCypher]

Looks pretty good on those wheels.