Millenia S supercharger fits protege5 2.0l???

[s4tt_rush]

Hey guys i just put a deposit on a protege5 today as a winter car. The power is pretty decent but there is missing a bit of oomph. I'm wondering if the millenia s supercharger could be applied to the 2.0l? and if so is it really hard to do? sorry for the noob question.

 

[hornsfan10609]

An MSP or similar turbo setup would be much easier. I doubt the blower would fit, people (HKPro5) have run a mercedes supercharger but turbos are the preferred choice for FI.

 

[x DeadTaco x]

Ive seen only one person who had done a Millenia S swap with the supercharger on it, into a Protege. I haven't heard of anyone swapping only the supercharger so I wouldn't know if it would fit or not.

 

[s4tt_rush]

ok thanks for the input, turbocharging would probably be the easiest route but i was looking at supercharging for the fact that the power is more linear. anyways ill keep my eye open for some FI kits.. Does anybody on here have the ebay kit that goes for 1000$?

 

[tyman108]

Wait till you see one in the FS section and but it from a member.

 

[tweety2300]

eBay kit will easily destroy the fs, the motor isn't very strong and won't handle the 50 trim t3 that most eBay kits come with

 

[larson701]

How is the AFR adjusted on Mazdas when a TC or SC are added? Is there a re-programming option for the ECU on Mazdas?

 

[tweety2300]

No, you can use an msp Ecu if you're using a t2554/60 and runing 7-8 psi. Anything different and you will need a piggy back

 

[bikingpro5]

Wait till you see one in the FS section and but it from a member.

2 FS right now on here, SC is not worth the time or money involved to only get the 4PSI that youll see from the stock crank pulley and stock SC pulley.