i need help with a quickness lol, oil squirters!!

[MSP_4_CODY]

i just had my block machined and the stupid asses that did it decided the diddnt wanna remove the oil squirters so they bent and broke them instead, and i dont know how to get them out. i really need to get my car back on the road so help would be very appreciated thanks.

 

[SleepyMSP]

I though they were just bolted down, accessible from the underside of the block

 

[MSP_4_CODY]

nope its like the pressed in but i cant fins a tool to pull them out

 

[SleepyMSP]

did you check the shop manual?

 

[MSP_4_CODY]

Not yet.. But I actually work at Mazda and I couldn't find anythin on it on the website whatsoever.. But I'm gonna call the tech line and see what they say tomorrow

 

[Beat]

My machine shop had to broke them also, bought new for 15$ each at dealer.

 

[Captain KRM P5]

my machine shop guru welds a piece of exhaust hanger rod to each one and yanks them out. they cannot (or should not) be reused. they are press fit. on the newer 2.0 and 2.3 in the mazda3, etc, they are bolt in self aligning. lucky bastards

 

[MSP2003.5_Nick]

You're gonna want those. I wouldn't bring a motor back to them if they managered your s*** like that. They should know better. My machinist just called me and was like, "Yeah I had to ravage your squirters, you want me to order new ones?" I'd imagine yes lol.

 

[MSP_4_CODY]

ya i wont be bringing it back to them, i got em out finally, thanks for your help guys

 

[Maxx Mazda]

Ya you're supposed to drill them out and press new ones in.

 

[719prottege]

whats the benifet to eliminating these?

 

[CHIQLES]

i used my dremel to cut the squirters flush so i could put a socket then as i rotated i pulled up nit that hard..just be patient.

 

[bikingpro5]

i used my dremel to cut the squirters flush so i could put a socket then as i rotated i pulled up nit that hard..just be patient.

i hope he has these out by now with the OP date of 02-18-2010, 11:06 PM...

 

[CHIQLES]

lol good one