HKPRO5's Supercharger Build Thread

[HKPRO5]

=( no I keep putting it off. Im going to night shift in April so ill have the time to do it then. Just need the money now.

I also want to find a cap for the EGR fitting on the 626 headers, Do you know what size it is Bedwards?

 

[bedwards6954]

I could tell you the thread pitch, just got to check but not sure on size, do you still have the egr fitting? its hidden so I just cut it and bent the pipe over a couple times and clamped/crimped it

 

[HKPRO5]

On the headers that I have the the EGR fitting is way smaller than 1/2" like the Protege one is. I guess ill get anything you got. lol

 

[bedwards6954]

its a 1.5 thread pitch, on my probe stock header, if I had to guess I would say an m14 or m16, I have a spare line with both nuts on them

 

[HKPRO5]

Washed. It's been forever. Got some things in the works for future projects. I'm going to night shift soon so I'll have time to do then.

2 gauge radio surround
NASCAR front splitter on a DG lip
Drivers side foglight intake duct
Wire tuck

I know there are a few other things...

Oh 1/2" FIP is the closest size, gOing to use some sealant with it. If I have time I'll be slapping that on with the breather filter tomorrow.

 

[ajkulish]

what are you doing with the old header?

 

[HKPRO5]

I cut it up to use the old o2 bungs. =)

Sorry!

 

[ajkulish]

Damn. I woulda bought it.

 

[HKPRO5]

Ok, this week ill be picking up some small stuff to make the Dyno session better. New K&N intake filter (RB-0700) and Spark Plugs (1 step colder)


EDIT:

03-31-11 I cleaned up the vac lines, trying to get someone to weld the HKS flange on my alum. piping so i can have the BOV on the hot side. =)

My last attempt didnt work so well with having the bov too close to the MAF.

Edit: 04-1-11 I dont want to post alot. lol

Got a SpeedCircuit Straight water neck in the mail today, now i just have to figure out how to make it work. =)

 

[HKPRO5]

Found a bad ass program for making switch panels. Although this setup here would cost $47 to make. So... Ill just pick up some ABS and make it myself. lol

Here will be the switches for the SC and 2nd cooling fan. Also a voltage gauge if i can find a 5v power source.

 

[ajkulish]

that's ******* badass.

 

[Sport23]

That's really nice. What program did you use?

 

[HKPRO5]

www.frontpanelexpress.com

 

[bullshark524]

why a 5v power source? wouldnt you want a 12v source?

 

[HKPRO5]

yea I would like a 12v voltage gauge....lol I purchased the wrong one. The power source needed is 5v. Although the inputs handle up to 100v lol.


EDIT

 

[ajkulish]

i like that. and since when do you have projectors?

 

[azuelke]

i like that. and since when do you have projectors?

He got those a while a go from another 808 member.

 

[ajkulish]

hmm never noticed.

 

[HKPRO5]

Yup the lenses are a little hash and the drivers side is aimed a bit too low but it was a pretty good deal for $100 with bulbs.

 

[stkmp5]

Idk why I never subbed to this before.