Fiesta front sway bar size

[envy2]

Does anyone happen to know the size/diameter of the fiesta stock front sway bar when compare to the mazda 2 stock 19 mm. I'm trying to decide which is the best and cheapest route to go. I might end up with the racing beat suspension package but want to check all options first before deciding if I'm going to piece it out or just go with the RB package.

 

[BigBlueDart]

Have you checked out the Corksport option, yet?

http://www.corksport.com/corksport-mazda-2-front-swaybar.html
http://www.corksport.com/corksport-mazda-2-torsion-bar.html

 

[envy2]

I have looked into their sway bars but being cheap I'm looking for the best bang for the buck. I'm gearing towards the racing beat suspension package because I want some improvement in the autocross course (local level) but still suitable for daily driving. If I can piece together a cheaper setup with almost the similar gain the I'll go that route.

 

[BigBlueDart]

The Racing Beat stuff is more expensive than the Corksport stuff.

 

[envy2]

I know but gut feeling wise I feel the racing beat rear bar is better. The B-Spec rear sway bar is around the same price as the RB rear sways so I might consider that. Price wise its verys similar if I am adding them together.

Racing Beat Suspension Packge from GoodWin Racing = $520

Corksport Rear sway ($99) with RB front sway ($199) + springs (RB or another brand around 199-213) = $497-511


Cheapest route I think is Ford Fiesta Handling Package with a fiesta front sway and a CS rear sway. I mean I can get it for 210+75+99 = $384 excluing shipping ofcourse. I'm just not sure how good it will be when compare to the RB stuff. Sometimes you can get away with the cheap stuff, sometimes you need to spend the extra $$. Then again I'm contradicting myself about going cheap but then again I did say best cheap route.