alignment specs.

[trekv2]

is any instred in some alignment specs. for the MSP?
i just got back from the HUNTER advanced alignment class and did a alignment on my car the specs are not out yet for SOME alignment classes i know there not out for kauffman tire yet. if any one wants them illl post them.

 

[t3ase]

uh.

 

[Sixmil]

I do not understand the words that are coming out of your mouth....j/k

Can you explain what you are talking about.

-Six

 

[trekv2]

Does any one want the Stock Alignment specs. for the MSP? this is mainly for Auto-x ers.I have read a while back that some people want the Alignment Specs. Now I have them. AND before I type it all out i would like to know if any one wants them!
get it?

 

[AFaceInTheCrowd]

i'll take them...

 

[trekv2]

FRONT / SPEC / TOL. +/-
-----------------------------------------------------------------------------------
Left camber / -0.97Deg. / 1.00Deg.
Right camber / -0.97Deg. / 1.00Deg.
cross camber / 1.50Deg.
left caster / 2.02Deg. / 1.00Deg.
right caster / 2.02Deg. / 1.00Deg.
cross caster / 1.00Deg.
Total Toe / -0.10Deg. / 0.10Deg.
left SAI / 12.98Deg.
right SAI / 12.98Deg.
cross SAI

REAR / SPEC. / TOL.
-----------------------------------------------------------------------------------
left camber / -0.80Deg. / 1.00Deg.
right camber / -0.80Deg. / 1.00Deg.
cross camber / 1.50Deg.
total toe / -0.10Deg. / 0.10Deg.
Thrust Angle / 0.80Deg.
------------------------------------------------------------------------------------
The only diffrence from '01 MP3 is the Total toe.

 

[OutDriveU]

Cool I waqs wondering about this. Anyone know the limits on our car? Like can you put -2 on the front stock or u need a camber plates???

Thanks for the info, now I can get it set up to AUTO-X!!

 

[2K3 MSP]

So if I take these specs to the alignment shop, they can align it to these specs without any problems??

 

[trekv2]

So if I take these specs to the alignment shop, they can align it to these specs without any problems??

yes.

yes. you can as far as -2 Deg. camber the Tol. (Tolerance) is 1.00 +/-
meaning you can go to -2Deg. or 0.00 Deg. w/o being out to factory spec.

 

[TheMAN]

those specs have been around for months already on this board and has been since october in the Protege FAQ

 

[trekv2]

damn i did a search and could not find them.

 

[Allen]

http://web2.airmail.net/emann/protegefaq/