Are these fog lights included in the kit the angel eyes? Or are they just standard fog lights? The reason I ask, is because they carry these for like $30-40 that are angel eyes. They would look pretty sweet in that area I think. I will be interested in these if my car ever gets an engine. Fog lights are useless if my car does not have an engine or a trans in it...
2003.5 Custom Fog Light Kit
- Thread starter www.03msp.com
- Start date
- Status
zmzmp5..that list of cars in your sig..previously owned cars..or wishlist..please don't tell me you have all of those..i will steal them.
www.03msp.com
Member
- :
- 2004 Acura TL
Morning...sent a .dxf file to a plastic fabricator, we'll see what happens.
Let's try to answer your questions...
As long as you have a 03.5 MSP lip, the assembly will fit it! It doesn't matter what vehicle the lip is attached to. The assembly is affexed to the inner lip with four screws. Heck, if you used the lip in some fabricated manner on an Escort it would work!
Secondly, if you have a prewired stock/aftermarket foglight harness, yes, just plug the +/- wires to the +/- wires on the fog it will work.
Thirdly, though these Pilot's are around $40-$60.00 (depending where you look), they are metal casing with glass lens. They are no better/no less quality than the PIAA 40's. These are the ONLY lights that will sit flush (way far back) into the openings due to their 2.5" depth. BUT BUT BUT, these are NOT the only lights that you can fit into the NEW GEN II METAL (as of last night, 6:03PM) assembly. Any 3-4" center/side mounted light WILL FIT - You just have to worry about the depth. Remember, you have 2.75" behind the plate to work with. Whatever light you choose may protrude out from the plate and not be flush (but still look good).
Fourthly, in the kit that I offer with the NV-602W's, I'm not marking any profit up for the fog light kit. I am adding parts and products to this including the assembly which I'm concentrating on making money on. So, HOW MANY OF YOU JUST WANT TO BUY EVERYTHING BUT THE LIGHT KIT and you can screw around with what lights fit yourself (with a few recommendations)?
Okay, today should be a good day. I'm awaiting emails/calls with pricing. I'll let you know when I know.
- Brian
Last edited:
That's tempting .... I could possibly be interesting in getting my own lights and buy/use your "holders".
But I really like the idea of a complete kit I can just install....and now that you changed the price back to 100 complete, it's even better! I'll have to reserve my final decision based on what the whole deal looks like.
One or the other I will pay pal you as soon as you give the word they are available!
But I really like the idea of a complete kit I can just install....and now that you changed the price back to 100 complete, it's even better! I'll have to reserve my final decision based on what the whole deal looks like.
One or the other I will pay pal you as soon as you give the word they are available!
www.03msp.com
Member
- :
- 2004 Acura TL
Working with a guy as we speak locally, so far, this is our take on things:
http://www.rtekimports.com/mazda/products.htm
- Brian
http://www.rtekimports.com/mazda/products.htm
- Brian
www.03msp.com
Member
- :
- 2004 Acura TL
I'll make the text bigger (sorry).
Regarding the extra blue switch, some people might not like the Dukes of Hazard size red switch (though I'm using it under the Ebrake), so I thought I would include a smaller one that could fit in the blank panel near the dimmer switch.
Regarding the tie wraps and electrical tape - man, don't any of you know how to make your own nice pretty harness on the bench and plug and play into the engine bay?
- Brian
Regarding the extra blue switch, some people might not like the Dukes of Hazard size red switch (though I'm using it under the Ebrake), so I thought I would include a smaller one that could fit in the blank panel near the dimmer switch.
Regarding the tie wraps and electrical tape - man, don't any of you know how to make your own nice pretty harness on the bench and plug and play into the engine bay?
- Brian
"I'll make the text bigger (sorry)."
No problem, I just copy/paste into word...
"Regarding the extra blue switch, some people might not like the Dukes of Hazard size red switch (though I'm using it under the Ebrake), so I thought I would include a smaller one that could fit in the blank panel near the dimmer switch."
Very VERY cool, I will absolutly use the blue one you mention near the dimmer.
"Regarding the tie wraps and electrical tape - man, don't any of you know how to make your own nice pretty harness on the bench and plug and play into the engine bay?"
Yes, but it costs you money to add the stuff and last I looked I have 4 rolls of e tape and 5 bags of wire ties, all different colors.
No problem, I just copy/paste into word...
"Regarding the extra blue switch, some people might not like the Dukes of Hazard size red switch (though I'm using it under the Ebrake), so I thought I would include a smaller one that could fit in the blank panel near the dimmer switch."
Very VERY cool, I will absolutly use the blue one you mention near the dimmer.
"Regarding the tie wraps and electrical tape - man, don't any of you know how to make your own nice pretty harness on the bench and plug and play into the engine bay?"
Yes, but it costs you money to add the stuff and last I looked I have 4 rolls of e tape and 5 bags of wire ties, all different colors.
www.03msp.com
Member
- :
- 2004 Acura TL
Yeah, but most people on the forum here don't have it. Believe me - it doesn't kill the cost whatsoever. If people complain, I'll strip the tape and ties out - price will not change.
Now, I am working with 3 metal fabricators and one plastic (still yet to hear back on).
It looks like the bidding is on.
- Brian
Now, I am working with 3 metal fabricators and one plastic (still yet to hear back on).
It looks like the bidding is on.
- Brian
Last edited:
www.03msp.com
Member
- :
- 2004 Acura TL
Found below is a day picture of my hand crafted GEN II metal. Remember, I have metal fabricators doing the FINAL piece. I will have full pics when they laser cut me two pieces.
Enjoy...
P.S. It is so butt ass cold here in Illinois and today was the first time I heard the suspension "crunch" - OMG!
Enjoy...
P.S. It is so butt ass cold here in Illinois and today was the first time I heard the suspension "crunch" - OMG!
Last edited:
www.03msp.com
Member
- :
- 2004 Acura TL
Nice comparison...
I updated our web page and YES, we can support a driving light.
Take a look at: http://www.rtekimports.com/mazda/products.htm
and for the specific light (though it is plastic housing, it appears to be pretty solid/protected behind our plate anyway):
I updated our web page and YES, we can support a driving light.
Take a look at: http://www.rtekimports.com/mazda/products.htm
and for the specific light (though it is plastic housing, it appears to be pretty solid/protected behind our plate anyway):
- Status
