wiring

I brought my car (2003 Mazda Protege 5, with 80k miles) in for an oil change and because the passenger rear brake light was out. When I got the car back, both the dash lights and the tail lights did not work. I checked the fuses and found a fuse in the engine block (the tail light fuse) was...

I brought my car (2003 Mazda Protege 5, with 80k miles) in for an oil change and because the passenger rear brake light was out. When I got the car back, both the dash lights and the tail lights did not work. I checked the fuses and found a fuse in the engine block (the tail light fuse) was...

I recently purchased a 2002 Protege5. The headlights and turn signals/ hazards do not work. The brake lights and tail lights work. Just no headlights nor turn signals. The previous owner did a hack job installing HID headlights. While I was working on it I decided to take the front bumper off...

Used 2003 has radio sound from front speakers only; works. CD sound from back speakers only. Right rear speaker (CD) has static, alternating with clear sound; mostly static. No pattern to its changing; lovely surprise when sound is clear. Don't know anything about sound systems. Am guessing...

Does anyone have any clear pics of their starters ON their car still? I can't quite remember how the wiring goes, and im afraid of wiring something wrong and popping a fuse or messing something up. There's the short black wire on the starter motor that i assume just connects to the starter...

Hi! Just bought a new 2011 CX-7. Looking to replace the head unit with an aftermarket, no name double din. I want to run the backing camera through the new head unit. Anyone know where to tap into the wires (I assume it's an analog output) and also I read on a cx-9 forum that theirs run on 6V...

Hey All, Okay I plan on installing the Pioneer GM-D9601 amplifier to hook up my (2) Alpine Type R SWR-1243D 12' subwoofers...I just want to understand a few things here... http://www.crutchfield.com/p_1308400BH/Pioneer-AVH-P8400BH.html I plan on buying the Pioneer AVH-P8400BH as my new...

I bought my CX-9 with the trailer hitch receiver and wiring installed. Today I got pulled over pulling a trailer because the trailer lights were not working. I have a tester and sure enough there was no power. I can find no fuse for this. Anyone know where it can be found?

Anyone have a source for install information, or know when it may become available?

I just joined because I'm having problems with some interal wiring. I just got into cars when I got my first one. I'm only 17 and I have a 1994 Mazda 626. I'm trying to wire some leds strips into the car along with a toggle switch and I'm just beyond confused. Was hoping someone could help me...

I have a 2010 speed3 non-bose regular key entry (non-keyless). My turbo timer requires me splicing into the RPM sensor to calculate the automatic shutdown time based on driving style. It also requires me to tap into the vehicle speed sensor to show accurate MPH on the timer. I have been...

Hi, I have just purchased an GPS unit with rear view camera for my 2007 cx7, just wonder if there is any installation guide for me to start with. Especially the part getting the wire through for back camera and connect. thanks in advance

Hi there everyone, Mazda 2012 CX-7 BCM markings EH56 67560A CONTROL UNIT-BCM KO216 11L12 ( barcode prefix number ) color of this BCM is BLACK not GREY. Box and connectors are in exactly same position as the older grey BCM's. But wiring is totally different. Looking mainly for CAN H and...

Hi all - I am installing a set of LED DRL's into the panel above the fog lights on my CX5 Sport in Aus. I have mounted them an they work fine with constant 12v but I cannot find a suitable switched accessory or 12v engine run connection point ( the second switched state on the keyless start is...

Hey Guys, I am new to this thread, and I also bought my Mazdaspeed3 GT fully loaded a month ago :) Im a super proud owner of it, however the person before me switched out the stock head unit for a crappy kenwood, and I was wondering if anybody knows where I can find the wiring harness so I can...

So the A/C in my Protege works, but usually only on fan settings one and four. On two and three, the air still blows but the light on the A/C button either flashes on and off or doesn't come on at all, and the air goes warm when the light is off. Any ideas where the problem might be or how to...

Anyone know what the wiring harness under the center cupholders (under emergency brake) is?

Does any one know the stereo fuse for the 99 protege lx I lost the fuse box lid and also if any one knows the stereo wires and colors for the cd player that would be great the previous owner cut the wiring harness off ugh

Fog lights nor side markers work. I've followed wiring everywhere I could follow it (so it seems) and I cant find any bad wires, splits or inline fuses. All fuses in the fuse boxes are good and the switch lights up but nothing happens when you press it. Any ideas??? Any help is greatly...

ok so here is the dealio. my engine blew and then my car caught on fire. yay i love when that happens.(ugh) ... anyhoo my wiring harness was destroyed and i need a new one, any good ideas on where to find one? im having trouble finding one. thanks, Miss Robyn