wheels

Please note the following rules & guidelines. Your cooperation and participation would be greatly appreciated, thank you. ENTRY RULES: * You must own the Mazda you are entering into the contest * Any form of photo/image manipulation is not allowed except for adjusting and enhancing image...

Whatsup whatsup, I haven't been on here in a loooong time. Just blew out a tire from a pothole yesterday, and 2 other tires have bubbles in them. NJ roads for you! My rims are 16x7 Motegi MR116, with a +40 offset I believe. The tires I have now are 205/45/R16, but these roads EAT my tires, so I...

03 MSP and 115xxx on her. i have replaced the cv axles, brakes, and rotors, thats about all in the wheel well. well anyways first started as a small small barely noticable (if i wasnt so picky, probably wouldnt have heard it) squeek in a right hand turn, 15-40mph roughly. well it is now when i...

So, I did a mock up [sorry for the bad Photoshop skills] of how the OEM 18" would look in a dark gunmetal/black finish on the red gt sedan. What do you guys think? YAY or NAY? original image >> http://www.blogcdn.com/www.autoblog.com/media/2013/07/009-2014-mazda3-sedan.jpg

Dear all, It's been few months my 2009 CX9 (103K) has developed a wiggle when I turn right... But not always and that's the rub. At first I thought it was the tires, so I hoped the wiggle will be gone when i put my set of 4 winter tires... It did not. Brought the car to Mazda, took it for a...

Looking for a set of stock-sized wheels to mount my snow tires for a 2012 Mazda 3 Skyactiv 2.0. I'd be happiest with steelies but I'm open to a set of OEM alloys. Just need something cheap and effective. Specs are normal, but just in case: 16"x6.5" 5x114mm bolt pattern I'm looking to spend...

I like my Protege5...but I hate the wheels. The tires selection is relatively limited (& expensive) and I can't seem to keep the wheels away from the curbs. Current tire size is 195/50/16 - Kumho Ecsta. I'm thinking if I switch from 16" to 15" I'll save in the long run on tires and the...

Cant decide to go with a white or bronze finish to the wheels. I've already done black. Thinking of using plasti dip, great product hasn't let me down yet.

Hey guys, I'm looking at getting a new set of tires in the near future for my P5. The ones I've seen the most positive reviews for are the Kumho Ecsta 4X's and ASX's. Problem is - none of the tire companies in the area carry those in-stock. So, would it be good to get a different-sized tire, or...

Hi guys I've recently bought an 03 mazda 323 here in the uk! These cars aren't as popular over here as they are in the states. So was wondering if any of you guys could help me out? I'm looking at stancing the vehicle (hella flush in the USA) I can find a few vids on YouTube but none with much...

http://www.ebay.com/itm/Genuine-Honda-Accord-V6-Acura-TL-CL-Chrome-Mesh-Wheel-Rims-Accessory-Wheels-16-/370626671675 Looking to see if these will fit. New to the p5 family so I'm still learning. I'm on springs and a 1" spacer on the front. Springs only on back. Still have about an inch of...

SOLD!!!! For sale is a 17" Racing Hart aluminum alloy wheel from a 2001 Mazda Protege MP3. The rim has curb rash as shown in the photos. The center cap is included ($75 new alone). The tire included is a Mastercraft Avenger 205/45R17 with 6-7 millimeters of evenly-worn tread remaining...

2003.5 Mazdaspeed Proteg Racing Hart wheels on 2000 Proteg LX? Hey guys, this is my first time posting heresy forgive me for any errors, But i came across a set of racing hart wheels from a 2003.5 protege for a good deal. I was wondering if there would fit my 2000 LX. The specs on the wheels...

Hi guys . I am about to buy a SOUL RED CX5 2.5P . In new Zealand we have three models with 2.0P,2.5P or 2.2D.. Entry GLX. Middle one is GSX and top one is Limited. We don't have any add on packs and tech kits available here . You get what you get and that's it. The models in New Zealand are...

Hey guys, So my passenger side rear wheel bearing on my 02 p5 was getting alittle to wobbly and grinding alot, got the new hub assembly, and began taking everything apart, it was going good till I got to the old hub assembly, it's seems to be seized on the spindle, ive hit it a couple times...

New Images have been released for Michelins new all-season tire, the Pilot Sport A/S 3. "The best balance of wet and dry performance we've ever experienced in testing" - Car & Driver

Hey Guys, Quick question if anyone can help? I'm looking at rims from a 2005 Mazda 3 that I found online. Question is, The post says that the rims are Rim Specifications: 17 x 6 1/2 JCH, F16 No 22, and my current rims are 17x7 stock rims. Will my 205/50-17 tires from my current rims fit...

Here is my 2, stock gs with 16x7.5 wheels and 205/55r16 yokos and blacked out badges, side markers. Windows, tail lights soon. Getting lowering springs for it also.[/URL][/IMG][/URL][/IMG]

I was driving down a dirt/gravel road when I started getting a banging rattling noise from the back of my car. I looked around, but I couldn't see anything caught in the wheel, etc. It bangs when going over bumps, but has a constant rattle. It drives and brakes like normal. Could a rock be...

How To: Replacing the front wheel bearings on a Mazdaspeed 6 Replacing the wheel bearings will likely happen around 100,000 miles for our cars. You will know by the sound, the faster you go, the louder it gets. You can confirm that the bearing is bad by jacking up the car and spinning the...