transmission

  1. R

    Clutch quit working - pedal sticks to the floor - release arm is floppy

    I had the clutch replaced this last spring/summer at a private repair shop that I've used a number of times. A couple days ago, my wife couldn't get the car started and thought the battery was dead. It wasn't. The clutch switch was not being actuated when the clutch pedal was pressed to the...
  2. R

    02 p5 transmission wtb

    Having synchro issues in my manual trans. I've been told it would be cheaper to buy a new tranny than to fix mine. Any thoughts? Also wondering if the 03 p5 tranny and engine will fit in the 02 so I'll have more options. Any feedback is much appreciated as I'm new to the Mazda world
  3. 2

    2.0 transmission swap?

    I have a 2.0 p5 and I was wondering if the tranny out of a 2005 mazda3 will work with the motor.it is already a 5 speed but it has no 3rd gear
  4. 1

    Automatic transmission not shifting gears automatically

    Hi all, I was about 30 minutes into my morning commute and everything was normal. Then, I stopped at a traffic light. When I tried to accelerate, my CX5 jerked twice and when I continued to accelerate, the gears wouldn't change. It appears that my gears stopped shifting automatically. I...
  5. F

    Hello...and Help! Escort gears into a 2003 Protege case....

    Hi everybody, I'm new here and I could really use some advice. I've got a 2000 1.8L protege and my f25m-r is at deaths door. Fine by me. I've been wanting to change over to a g-series anyways. A few months ago I grabbed a g-series tranny from a 1997 escort spi because of the 3.85 final drive...
  6. B

    MSP Full Build

    I cant find info anywhere. Im doing a full build on my MSP, bore .020, forged crank, forged eagle rods, forged wiseco pistons, stage3 clutch, ARP head studs and bolts, AEM management(replacing SplitSecond), 440cc injectors, possibly 255lph fuel pump. Gonna be looking at about 400hp/380ftlbs...
  7. T

    2013 Mazda3 i Touring Automatic Transmission Problems

    Hey everyone, looking around to see if anyone has had similar issues with their Mazda3. I have a 2013 Mazda3 i Touring AT with less than 2000 miles on it. I have noticed that the transmission slips. For example, when I back out of a parking spot and put it into drive, it will often rev like...
  8. M

    Tranny Problem 2012 skyactiv Auto

    My 2012 Mazda 3 Skyactiv automatic tranny needs replacement after 22k Kilometres still waiting 6 weeks and counting for tranny to come from Japan, no Dealer contact in last 4 weeks Mazda Canada no help either, I've owned 9 Mazda's over the years because of poor customer service I will...
  9. M

    Fuel door locking pin - dropped into body! Whoops!

    The fuel door was not clicking shut on my 2007 Mazda5. I found the problem. One of the two pins in the fuel door latch was not extending to grab the door when closed. It was stuck inside the housing. I figured a little lubricant would fix it up. I took off the retaining nut and lubricated the...
  10. M

    '08 Mazda6, clang/thud when moving from 3rd to 4th gear (ATX)

    I picked up an '08 Mazda6 about 3 months ago, had it checked out at a local mec. shop recommended to me and everything checked out. A diagnostic test was run through the computer and everything looked good. The only problem was a transmission oil leak that I had the guy fix. About a month or...
  11. M

    WTB Transmission

    closed
  12. K

    Engine Misfire or Transmission Issue?

    I am hoping to get some guidance on a problem that I am having with my 2007 CX-9. The problem occurs when I am cruising just below 60 mph and around 1500 rpm in 6th gear. When I apply the gas lightly to accelerate, the vehicle seems to "stutter" right around that 60 mph mark, the car seems to...
  13. B

    Can't engage transmission after Neutral Safety Switch replacement

    I had and issue starting my car in park. It would sometimes start (mostly not) but if I put it in neutral it worked everytime. I bought a neutral saftey switch and put it in. During the install the shaft that the NSS goes on came out of bit but I was able to slide it back in pretty easily...
  14. A

    Please help, Started taking off and grinding noise! Transmission/Cv joint???http://ww

    I was going down my road today and just put new plug wires on my MSP, I stop at a stop sign and go to accelerate pretty rapidly, I got to about 4k rpm and the car felt like it slipped out of first gear, not thinking nothing off it ( thought it was a one in a million thing, never happens ) went...
  15. S

    Protege MP3 with a 626 tranny problems!

    I bought a Protege MP3 from a friend. I replaced almost the entire front end when I still noticed a grinding noise. I asked my friend and he said he had put a 626 manual transmission in it. I did some research and found out the 626 axel is about a 1/4 of an inch longer than a stock Protege axel...
  16. J

    Mazda2 Workshop Manual

    Hi guys, Do you know where I can get Mazda 2 workshop manual from? I looked everywhere (I think) and no biscuit. Any help would be appreciated. Thanks
  17. K

    Transmission/Clutch Problems

    Alright guys so I've been doing a lot of searching on the forums to find exactly what my problem might be and it seems like its been addressed but not really answered. There are two things that happen in my car that make me think its either a clutch issue or one of my forks. It usually happens...
  18. B

    Engine racing when braking

    Hello all, The last few weeks I've noticed that sometimes when I am braking to slow down the car to make a turn, it seems and sounds like the engine is racing as if I had it in neutral and was putting my foot on the gas. This is a 2013 automatic touring in Drive. Has anyone else noticed...
  19. P

    1998 Mazda Protoge Free Repair Manual Download

    Can someone please provide me with a link to download a free (truly free) repair manual for a 1998 Mazda Protege? Thank you in advance.
  20. K

    2012 CX-9 GT - Brake fuse?

    Got a (hopefully) quick question for the gurus. Just bought a brand new 2012 CX-9 GT. Within 2 hours of purchase the wrench light came on, TCS off light illuminated, and cruise control stopped working. The car had diminished power and inability to accelerate. Dealer says a blown brake fuse...
Back