sensors

Hey I recently got a P0031 check enginde code which refers to overheating in bank 1 sensor 1. So I wasnt sure exactly which oxygen sensor this was, is this the one right on the front or underneath the car? Also I was trying to unplug the oxygen sensor and the actual electrical plug is so hard...

My 2007 CX7 hesitates and the dealer checked the codes, concluding the oxygen sensor needed to be replaced. They wanted $390.00 - for the job. I presented him with a TSB stating a faulty oxygen sensor was a known issue but to no avail. He stated my car was out of warranty at 47,000 miles. Has...

is leaking oil... for reference this is the sensor a few inches above the oil filter on the back of the block. I see a bit of oil drip on the black cable that connects to the silver bolt. there is also some black goopy stuff on it. can i just take this sensor out and fix the leak then put it...

I just got a PO421 for the fourth time and finally, i am giving into the fact that i cant just keep resetting my cel. I need to do something about it. What have you all done to make this problem go away? I'm thinking of just going cat-less soon, so is there a way i can relay the catalytic O2...

My check engine light came on and I got it checked out and was told I need to change my sensor or thermostat. I'm pretty sure its my sensor so I'm changing that out. But could someone post where exactly its located? thanks

Can't seem to find the oil pressure switch on the mazda tribute 2001,thought it would be the motor oil opening but nope,then i thought by the oil filter but nope,now im thinking maybe on the oil pump but i really don't have a clue...help me

Hey Everyone, I am having a huge problem with my o2 circuitry. I get the P0134 no activity from the upstream o2 sensor; I changed the sensor with a new OEM denso unit and I am still not getting any o2 voltages on the when I data log from the obdII port. i read 0.00V on the front o2 and...

Hi all, My car is a Protege 2002, ES, 2.0L engine. Initially, I got P0300, then I got a bliking CEL but had to drive, then changed the spark plugs and the CEL went away. But after a few miles at ca 50mph, I got a new CEL. I got it checked today and got the dreaded P0421. It might be...

I bought my P5 new in 2001, and have kept it stock ever since. I have 128,000 miles on it. A couple of years ago, I started getting the random misfires. Replacing spark plugs and wires helped, but it was replacing the coils that finally fixed it just about a year ago, just in time for me to...

Check Engine Light (CEL) System Too Lean (Bank 1) Re: 2003 Mazda Protg5, 46,800 miles, All Stock. The CEL came on, took car to Auto Zone, got code - System Too Lean (Bank 1). I call my maintenance Mazda Dealer and they wanted over $300.00 just to change the Oxygen Sensor. I replaced the...

I tripped the ABS and brake lights, so I ran the codes and got 14 and 48. Pulled the LR sensor, cleaned it, which got rid of the 48 code, but not the 14. I have never seen only one code go through (usually they're in pairs for each corner). Any ideas on what might be causing the 14 to stick...

My Car 2002 P5 145 xxx km Standard and stock I have a P0421 code and sometimes at idle my car will drop below 500 rpm if you give it gas its okay. I believe the computer is not controlling the air/fuel mixture properly. My manual says thats its the O2 sensors (loose or malfunctioning... they...

Hi there everyone, I have an Autometer temp sensor gauge. I was thinking about doing a whole transmission pump and cooler setup from NSN but have scaled back that plan (along with a few others) in terms of modding the car. Now, I just want to somehow place the sensor so it will read the...

So i got the O2 sensor replaced and before it can pass emissions I was told I needed to reset the monitors by doing certain driving cycles. I had to call the manufacturer...who knew nothing about it and to call the local dealer's service dept. Who also knew nothing about it. i was told by a...