paint

The paint on my hood is peeling badly and shows metal underneath. I think the heat from the engine is accelerating the process. I previously had to remove the fiberglass insulation underneath because a Brooklyn rat kept chewing it for a nest and leaving bits of it all around the engine...

Just bought my first Mazda the other day. Normally i would stray away from buying a car/suv which was used as a rental, but the deal was too good to pass up. The CX-5 has a few minor scratches from luggage being dragged out of the back, and paint chips on the hood from highway driving. 1. What...

As many of you Soul Red owners know, the paint is peeling off and chipping at an unreasonable rate. I personally have five chips on my hood, with less than 3,000 miles on my 2017 CX-5. I've seen countless complaints from other Mazda owners on this forum and other forums as well. I've been in...

Hey all, I'm new here just bought a new 2017 Cx-5 GT. Great car looks sharp and I want to keep it that way. I know there are tons of posts out there about this and so much info to sift through but I was hoping someone could give me a quick rundown. I live in Northern Ontario, Canada and the...

I made the grave mistake of letting the "detailer" at my dealership wash my car. He 100% does not know what he is doing and SPRAYED GREASER ALL OVER MY CAR AND TRIM. He also sprayed my engine bay WITHOUT permission, and fried one of my HID relays or ballast.(fckin pissed) & as soon as I got it...

So I joined the club! I was just about to bite the bullet on a 2017 Civic GT Hatch, but after testing out the 2017 GT CX-5 I was sold. I've never purchased a new car before, but I tend to hang onto vehicles until they reach the point where one thing after another starts giving me hell. Last car...

Number of times I see off and on posts on quality of Mazda paint - some say its comparable to others of today's age while others comment on thinness of the paint in general. This poll is to take an overall perspective of this. TRI-COAT: SOUL RED WHITE All other OEM colors are standard...

My 2002.5 Proteg5 now has a nice ding that's gonna cost me over $400 to get fixed. It's always been garaged -- and it was the garage that attacked it! My garage door has tension springs. Many do, but others have torsion springs that are wrapped around a shaft; if yours is this latter type...

Every time I look at my freshly washed, black Protg I get a little sad. You wouldn't believe how many tiny scratches my poor car is covered in.. and those HIDEOUS oxidized spots. Anyway, I don't have the money for a professional paint job/touch up so I'm here asking if anyone out there can give...

Have any of you found rust on you 2014 or 2015 Mazda 6s? If so, where?

[Deleted] [Mods please delete, thank you.]

So I was watching some videos today on how people were buffing the paint back to its original color. Is this a hoax and will my sun damaged roof have to be painted again? or is this a successful fix on sun damage?

So i'm trying to fix up some of the surface rust on my 2003.5 msp, and I was wondering if anyone knows where to get the special tri-color yellow paint they used oem. Thanks!!

Hi guys, I'm new to this forum. Recently I just bought a set of 19" oem rim to replace my 17", before swapping the wheels I would love to change the color. What do you guys think would be best match for pearl white sport?? Also, I was wondering if anyone here had either painted or wrapped their...

I have 4 PR5 OEM wheels, 3 that have the chrome look (not sure if its actual chrome or just polished aluminum) and 1 that is white. I want to paint them so they're all one color; I know I can paint over the white but is it possible to paint over the chrome-finished ones? If so, what's the...

All, right, so my 2002 P5 wheels have lots of bubbles and chips in the paint, and I decided to get them ready for some Plasti-Dip. The paint is coming up at the rim edge, on the edges of the spokes, and around the center cap. The wheel under the paint is a rough cast aluminum finish, looks...

So, I am finally getting around to fixing the rust that I mentioned in a post a little while back, but now it is an actual issue... My plan is to take a wire wheel, wire brush, and some sand paper to the rust spots that are developing then fill in any holes with a body filler of some kind then...

I've searched for this but can't really seem to find anything. Anyone know a good touch-up paint for the 2007 20" GT wheels? Looking to touch-up some minor curb rash. Thanks!

I'm looking to spruce up my engine bay, and i notice a lot of people who have different paint jobs on their valve covers. Would you recommend getting it powder-coated or can i just paint it?

Most of you have probably seen the yellow ukraine mazda3 which is on a couple of websites. Well, what he did is pain his headlight bezels black and it looks beautiful and clean. I was wondering if anyone else had it done and could tell me how to, or if anyone is selling a pair of painted...