Greetings!
I'm proud to announce that from this point forward, SpeedCircuit will be the sole source of Pope Engineering Performance (PEP) products for the Mazdaspeed Protege! Both the turbo manifolds and downpipes are going into production.
To celebrate this occasion, we are offering a...
Hello, I have a 2001 Protege 1.6 LX and was wondering if any other protege headers (other than the OBX headers) would fit without modification. And what other parts/cars are interchangeable with the 1.6. Such as the 1.8l or something else. Thanks!
Need stock exhaust manifold and the first catalytic converter. Bolts too if you have them. I've got $80 for whoever can get me this setup. Also I'll be removing my obx header so I could trade you that for the stock setup. Thanks to the community!
I am doing a pretty long list of mods all at once on my MSP, including upgrading to a Speed Steed mani and a gt28 turbo. The problem that I have come across is that both the turbo and mani have threaded holes to mount to each other. Also, one of the holes on the mani is only accesable from...
I had finally take the stock manifold heat shield off to see if I had any cracks on my manifold, the shield bolts were completely rusted and the heads just broke off. Stock exhaust is un-cracked and all bolts are still tight and all there but rusted. Car has about 36.7k miles on it. I wanted to...
Will a 2.0L Protege exhaust manifold fit the MSP? I have a crack on my exhaust manifold and I'm thinking of just getting a 2.0L one. Either that or using thermosteel to patch it back up.
My Hot-Pipes manifold arrived today (nana)
It feels a nice quality product, all welds look pretty and have been done to a high standard. Can't wait to have it installed Thursday!! Will add pics of installation on Thursday night/Friday :)
Will edit post later linking to photobucket with...
Msp parts and goodies up for grabs located in CA
Msp custom steering pod hand made very legit tons of hour spent on it 60mm
100.00 plus shipping SOLD
Msp radio bezel 15.00 plus shipping
Msp intake manifold with all butterfly's and check valves working 65k miles 30.00 plus shipping
Msp sub...
I have a 03.5 MSP and i have a cracked exhaust manifold and i cant find a stock Callaway one anywhere. So i just need advice on a good after market exhaust manifold i can get for my car. Im 17 and this is my first car so i dont know much about it. Thanks!
I had some misfire issues with my wagon but new spark plugs and coils fixed the issue. I recently ran an OBD2 scanner and two faults show up even after clearing them, although the vehicle idles and runs great.
Current Fault Log
------------------
P0106: Manifold Absolute Pressure/Barometric...
hello im new to this form and i know all of you guys will have a lot more info then me on this but i was wondering if the 1.8 manifold would fit on the 1.6? because my bolts broke off the bottom of the manifold and i had to weld it and now that i got a little more money i would like to fix it...
Selling an MSP manifold and S-pipe, both are in great shape, no cracks what so ever.
I am going a different route, so I need to sell these to recoup some of those funds.
looking for $150 shipped to the lower 48.
Hi, ok, so i am now ready to sell these items.
I want to sell all as a set, so the total will be 230$ O.B.O. Shipped.
this is a great turbo-kit starting package as all you are missing is a 300$ turbo ad you are almost there!
shipping on to continental U.S.A.
no international shipping.
local...
Here's a 626 intake manifold off a 2000 motor... it comes with everything you see in the pics... fuel rail (for perfect fitment, no need to use your stock fuel rail and have it flopping around), 2002 626 EGR pipe (allows perfect fitment to the stock exhaust manifold), vacuum hoses, 34psi (at...
Offers are priced OBO, please contact via PM for purchase. I accept PayPal only; shipping is from 97008 if you wish to calculate shipping (intake weights about 24 pounds) I've been selling on ebay for 10+ years and typically will ship 1-2 business days after payment.
I recently replaced my...
I'm in the market to do some upgrading and front end damage fixing. As far as performance goes I'm looking to get a SplitSecond Air/Fuel controller, Thunder V2 or MAM exhaust manifold, Air/Fuel ratio wideband gauge, 440cc injectors, and what ever else you can offer. I already have all bolt-ons...
I'm looking to buy a Split Second AFC V2, Thunder V2 or MAM exhaust manifold and Mazdaspeed Protege front bumper. Oh and if anyone has a wrecked protege, (Sorry by the way) I need a Drivers side rear quarter panel cause I got into a little fender bender myself.
Ok ill start off with what this engine is going to have
FS-DE block:
.5mm over boor, 10.4:1 pistons
polished and balanced crank
all new tighter tollerance bearings
aftermarket piston ring set
FS-DE Head:
Mild to medium port and polish
3 angle valve...