cai

  1. Z

    Question about SRI & MAF sensor

    I saw a picture of a Mazda 3, where the owner relocated the MAF sensor with it's original housing, behind his SRI. Now, I thought to fabricate my own CAI using a HKS filter, along with a custom box and heat shield material. Question being, does the MAF sensor freak out? I'd love to hear from...
  2. B

    CAI Cold Air Intake

    I'm selling this CAI purchased from ebay a while ago. I replaced the original filter with a K&N RE-0930 and also added the prefilter, because I used to drive in very dusty conditions. There's a rip in one of the couplings which needs replacing. The other coupling and the elbow are still good...
  3. B

    Injen Cold Air Intake for 2015 Mazda 6

    Recently bought a Injen CAI for my 2015 Mazda 6 but I havent installed it yet because this mechanic was talking to me and told me that the filter on the end of it is too close to the ground and if i went in water as shallow as 2 inches that it could suck up water and ruin my engine, resulting in...
  4. S

    Does anyone make a full length cold air intake for the 2014 Mazda5?

    I'm having a hell of a time finding a full length cold air intake actually made for the 2012+ Mazda5. There's very little out there and when I do find something it's always for the older 2.3 Mazda 5. Pretty discouraging... I did a search of this forum and came up empty handed as far as stuff...
  5. D

    FS: Protege5 AfterMarket Partout

    Looking to start selling some stuff off the P5 before I put the car up for sale in January. I am willing to accept trades as well, as long as its not anything for a protege. I am willing to ship at buyers expense 2 2mm universal spacers $20
  6. L

    Hps sri

    HPS Short Ram Intake. Comes complete with everything you need for installation, the heat shield is already attached. (This was the hardest part of installation.) This was on my car for roughly 5000 miles. K&N filter already attached as well. Gives off a mellow deep roar, kind of like a quiet...
  7. D

    Materials for Heat Insulating (Custom Air Box)

    Hi, im thinking in doing an Air Box for the CAI, just need to know what is the bests materiales to Heat insulation. I find a lot of products in this page http://www.thermotec.com but im not sure which one would be the better to use. So, if someone has another options please help thanks.
  8. M

    FS: PARTOUT: OZ Wheels, MS CAI,SU Testpipe, Turbosmart Dual Port BOV, Shift Knob

    Sold MS3. Parts that are left over. Mazdaspeed CAI, Turbosmart BOV, Street.Unit. Testpipe--SOLD 1. JDM/EUR Rear Fog Light: $100+shipping 2. K&N Drop in Filter: $35+shipping 3. OZ Alleggerita with Tires, No Curb Rash! // 215/45/18, +48 Offset,Thread Wear 400, Traction AA, PZERO NERO tires...
  9. Y

    Perrin turbo back and stock exhaust with other extra goodies low miles!

    perrin exhaust -450 obo SOLD stock exhaust-150 obo injen CAI with filter and MAS- 150 obo rather sell as whole but can part out contact me by my cellphone 443 280 4804 it will be easier and i dont check this much anymore because i dont have my MSP all prices are obo and do not include...
  10. J

    Rain's causing problems...

    i tried doing a search and didnt find anything helpful so here it goes. My ms protege occasionally has a rough time driving in the rain. white smoke(Steam???) comes from the exhaust randomly, usually a day or two after rain. i try to not drive it in the rain anymore, but not always possible...
  11. P

    Mazdaspeed CAI

    Mazdaspeed Cold Air Intake used in my speed6 is up for sale for $175. great condition, shiny and dent-free. Filter has been replaced less than a year ago. CAI taken off my Mazdaspeed6. Would prefer local pickup in Toronto but will ship anywhere in US/Canada.
  12. H

    WTB: Protege5 Intake

    Looking to get a cold air or short ram, Injen, K&N, AEM, etc. Would be great if you were in the Boston area so we don't need to ship it?
  13. A

    *BRAND NEW* Injen Cold Air intake FREE SHIPPING! VERY CHEAP!!!

    I'll try and keep this short and simple. This is a brand new Injen model cold air intake. Its never come out of its plastic its never seen a day of use. All the install materials and instructions are there. I've heard it takes less than 30 minutes to strap this sucker in and you get around...
  14. S

    SASK P5's P5 is gone sale

    So it has been over a month since i sold my P5 and i have my new(ish) car now, haha. anyway I've been putting this off but it is time to get rid of all my parts that i still have from the p5. Here is the list and prices (O.B.O.) + shipping. Everything is Sold 1.Mazda6 rear wiper arm/blade...
  15. F

    Cold Air Box - to buy or not to buy? That is the question...

    I am buying the CorkSport SRI for my 2010 MS3 and I was wondering whether I should get the cold air box as well. After all it's $90, so I'd rather skip it if it doesn't make a big difference. What do you guys think? I wonder, since the air has to go through the turbo (which is hot) and then...
  16. M

    GI: Mazda 3 Part Out

    Gaining interest for the soon to come part out on my car. Im returning it to stock and getting a speed 3. Here's the list of items: Injen CAI- $80 Brand New un-opened Sr*s 4dr exhaust- $200 (perfect fit for hatch) 2.5" piping (from header to end muffler) from used Sr*s exhaust (muffler...
  17. M

    2007 Mazdaspeed 3 Cold Air Intake

    2007 Mazdaspeed 3 Cold Air Intake asking $220 Shipped. (drive2) SOLD!! More Images Shows the Protective shield broke off i am actually going have this fixed. Shield has Been fixed!!! [/URL] Uploaded with ImageShack.us[/IMG] More Images...
  18. M

    Brand New Mazdaspeed CAI for MS3

    Brand new Mazdaspeed cold air intake for the MS3 (the revised version, with the airflow straightener). Brand new in box, never been installed. Includes all CAI components, two bottles of filter cleaner, and instructions. $300, shipped.
  19. S

    Injen black cai

    Hello, I'm selling my black Injen CAI for the MS3. I'm including all the hardware included when I purchased it. I've ran it for about 20k miles. Everything on the unit works just fine. I'm also including an additional Injen replacement filter, and a stainless steel splash guard I ran on my...
  20. R

    MS6: CP-e CAI, SU Test Pipe, Shorty Antenna, 3M weld RMM

    I'm selling the MS6 so I have some stuff to get rid of. CP-e CAI. Includes everything in the picture. For those worried about putting an intake in the fender, that hydroshield will protect the filter. There was flooding and pouring rain for over a week in the spring and NOT ONCE did I have a...
Back