blown

First off, to those of you out there not changing/checking your oil very frequently - start doing so now! These engines are being made way too thin/lightweight to improve gas mileage and as a result are going through oil at higher than "normal" (for most cars) rates. Mazda won't tell you this...

Hey guys, just a quick question about the rotary engines. I was thinking about buying an '83 RX7 off someone, but they said it dies whenever it goes under 2,000 RPMS. Apparently the carb was rebuilt, and they don't think it's the vacuum or timing. They suggested that it is a "blown" rotor in the...

no as usual Ill get straight to the point. 1997 mazda 323 engine blown, it is a 16 valve engine very basic. i need to find a new engine in munster Ireland, but am not sure exactly what years engines will do the job. originally i tried putting in a 1.5 dohc mazda 323 engine from a 1996 323...

Hey guys, its my first post here and I can't seem to find this anywhere in the forums. I recently bought a P5 and couldn't be happier. I decided to upgrade the stock stereo to a Double DIN with navigation. I did use the Mazda Wiring Harness and the only issue I had was the Illumination...

The engine in my cx7 has recently gone up in smoke. Literally. Is it possible to to replace that engine with the non turbo 2.5L that is on the newer models? I would like to get away from the turbo.

I HAVE A CYLINDER 3 THAT ON A COMPRESSION TEST ONLY READ 95 PSI WHILE THE OTHERS READ 155 PSI... WHAT SHOULD I DO?... other than not right in all caps anymore.

My stock turbo seals have gone bad. What should I do? A.)Buy the $700 dollar kit for brand new internals and use the old housing B.)Find a used one C.)Take mine and have it rebuilt D.)Buy a gt28rs

Hey guys, Just pulling apart the card to have a look at the problem. After doing everything I thought needed being done the head still won't come off. Here are the pictures of what I have done so far. Any help would be appreciated. Try keep it a little detailed as I am not the greatest...

SOLD SOLD SOLD Purchased a complete running/driving 01 Protege LX 2.0 with 130k on it to have a known good running engine for my MSP. Plans have changed and I am no longer going to repair the MSP so this engine is now available (and the MSP is being parted out). The female previous owner had...