brake rotors

Bought a used 2019 Mazda CX-5 and had to turn it in for a brake job. They said they just needed to recondition the brakes/rear rotors. We picked up the Mazda the next day and found shaking or vibrations every time we applied the brakes, so we turned the Mazda back in again and now they say we...

Is it normal to need 4 new rotors and pads on a CX-5 every 25,000 miles? Someone over on Reddit pointed me here. I read the thread about the EPB issues. I've called the dealer and they didn't think it applied and that it's just what happens if you drive in Chicago. My Mazda CX-5 has about...

There is a pulsing in the brake pedal when pressing. Pads were just replaced, but now I am thinking the rotors might be warped. I have posted a short video of it. Sorry the bandwidth of my NAS isn't great...

Hi, These are stock Front Brakes in great shape. Worked perfect. I just upgraded to the Mazda Speed 12.6 rotors and want to sell these. Make an offer plus what ever shipping and they are yours. Thanks, Paul

Hi all, I own a 2007 Mazda 3 GT and recently I notice that when I hit the brakes my steering wheel starts to shake. Could this be because my rotors are warped? If they are warped should I have them machined or buy new rotors? Any info will be greatly appreciated. :(

So I set out to replace the front Rotors and Pads in my 2012 Mazda 5. While I am no professional mechanic I have done my share of work on cars. I used to Auto X and Road race a 1985 Pontiac Fiero and had replaced pads and rotors, sway bars, eurothane suspension bushings, Koni's and lowered...

My 2012 - AWD - CX-9 makes humming sound with vibration when on slanting drive. I created video when it happened. Unfortunately , the audio , which I was willing to capture was not recorded as expected (however the real humming sound and vibration is more severe than the attached video/audio)...

I have 2012 4WD Cx-9 Touring. Odometer is 51k. History - I purchased from dealer as a pre-owned certified car in 2015. At that time odometer was 33k. Previously it was used as a fleet vehicle ( as carfax stated ). I started observing a pattern nowadays - when I apply break on and above 65 mph...

Hi, I have an odd problem. I replaced my rear callipers and rotors and pads recently, and then bled the brakes. Which seemed to work fine. I replaced all the aforementioned only because it was time, there was no other brake issue. After a week of driving the car brake pedal became slow and...

I just upgraded my brakes with the Mazda 6 upgrade. If you want to do that too, you can buy these caliper, trade them in fro rebuilt ones and save a lot of bucks on the core charge. Front and Rear Cailpers, Rotors and Brake lines. $75 plus shipping for all You will get ~ $50 credit on the...

Hey guys, just a quick question about the rotary engines. I was thinking about buying an '83 RX7 off someone, but they said it dies whenever it goes under 2,000 RPMS. Apparently the carb was rebuilt, and they don't think it's the vacuum or timing. They suggested that it is a "blown" rotor in the...

I am trying to replace the front rotor on my 2002 protege. I took the wheel off, took the caliper assembly off. From my understanding the rotor should come off. Nope. Here's what I tried - banging it off - heating, then banging it off - gear puller. This tore a piece out of the rotor. Tried it...

Whenever I go visit my dad, I drive Angeles Forest HWY (google it). Fun road. But for the second time in a year, I've 'warped' my rotors. Anyone else have to deal with warped rotors on their 6? Would drilled or slotted rotors be better than regular rotors? Seems like it would only really...

Hi....I signed up here just for this section of the forum. I'm told I need rotors and brakes and the stealership wants ridiculous money for basic parts. I am looking for front and back, zinc plated, slotted and drilled rotors and brake pads, preferably new. Can someone help direct me as to...

Hey guys, I need some help with the size of an allen wrench for removing the Brake Caliper + Rotor (2004 Mazda3 SP23)... It's right behind the rotor in a little tube- But there's a cover on it... I've tried every allen wrench I have, and none of them work... Can anyone help me? PLEASE!(dunno)

I know there is already a guide on how to replace the front rotors and brake pads, however, I was trying to find a guide for the rear. After paying the dealer about $400 to replace the front rotors and brake pads, I decided to do the rear ones myself. This is my first DIY project ever, so I...

2009 Mazda5 Sport, with the 40k and the original brakes. I've just spent an hour with penetrating oil and hammers (rubber mallet, then 4lb. hammer) trying to take the front brake rotors off. I've got the AllData instructions, and there really shouldn't be anything holding them in place once the...

Hi all!! I'm new here and this may have been covered in the past...if it has my apologies for reposting. But, how do you remove the Phillips head bolts that hold the rotors on? I've used all the goodies to no avail. Is there a special trick? Please help as I'm very limited on time and need to...

Hey everybody, I'm looking at replacing my rear rotors and brake pads and was wondering if anyone could recommend a brand and specific replacement products. I'm considering doing the work myself, but I'm a bit of a noob at this. I have replaced the rear shocks myself, since the stock ones...

You must be logged in to see attachments! As you can see from the above pictures these rotors did not last long. They were on my car for exactly 3 years and just happen to have 30679 miles on them. From my experience with EBC I do not recommend these as the rust is extreme. Before I...